Transferring Photos To A Computer (Direct Transfer) - Canon VIXIA HF11 Instruction Manual

Connecting
Connect the camcorder to the VCR
using Connection
Connection Diagrams (
Recording
1
External device: Load a blank
cassette or disc and set the device
to record pause mode.
2
Camcorder: Locate the scene you
wish to copy and pause playback
shortly before the scene.
3
Camcorder: Resume the movie
playback.
4
External device: Begin recording
when the scene you wish to copy
appears. Stop recording when
copying is complete.
5
Camcorder: Stop playback.
NOTES
• If remaining battery time is an issue, you
can power the camcorder using the
compact power adapter so the battery
pack will not be consumed.
• By default, on-screen displays will be
embedded in the output video signal.
You can change the displays by
repeatedly pressing
( 26)
. Refer to
80).
DISP.
( 55).
Transferring Photos to a Computer
(Direct Transfer)
With the software supplied on the
DIGITAL VIDEO Solution Disk
CD-ROM you can transfer still images
to a computer simply by pressing
.
Refer also to the relevant sections in the
"Digital Video Software" instruction
manual (PDF file).
Preparations
Install the software before you connect
the camcorder to the computer for the
first time. (Windows users only: you
also need to select CameraWindow's
auto-launch setting.) After that, just
connect the camcorder to the computer
(steps 2 and 3) and proceed directly to
transfer the still images (
1
Install the supplied Digital Video
Software.
Refer to the installation guide
(separate leaflet included with the
CD-ROM).
2
Set the camcorder to
Select in advance the memory from
which you want to transfer still
images ( 65).
3
Connect the camcorder to the
computer using the USB cable.
• Connection
Connection Diagrams (
• If the device type selection screen
appears, select [PC/PRINTER] and
press .
( 26)
).
89
mode.
. Refer to
80).
87