Table of Contents
Advertisement
Available languages
Available languages
Chapter 5 - LEDs
Chapter 6 - Additional functions
Chapter 7 - Option selection via AGy
Chapter 8 - Technical features
12
There are 8 LEDs. Their function is to state the functioning condition of the
digital I/Os. The following table describes the LED signals.
LED name
Signal meaning
IN 1
Active digital input 1.
IN 2
Active digital input 2.
Active digital input 3.
IN 3
Active digital input 4.
IN 4
Active digital output 1.
OUT 1
OUT 2
Active digital output 2.
NO
Normally open contact of the active relay.
Normally closed contact of the active relay.
NC
The card is supplied with the XOPT connector. Its function is foreseen only
for future developments.
The AGy inverter allows to connect two options.
The options are enabled via the I.700 and I.701 parameters. The EXP-
D6A1R1-AGY card has to be configured exclusively as option 1 with the
I.700 parameter. It is enabled by writing the "2" code of the I.700 parameter.
See the AGy manual for further information.
8.1 General features
Card name __________________________ EXP-D6A1R1-AGY
Card type ___________________________ Various I/O option for AGy
Compatible regulation card _____________ R AGY or R AGY2
Interface with AGy regulation ____________ Serial sinchronous
Period of the communication package with
regulation ___________________________ 10ms
Regulation power supply _______________ 24V
8.2 Digital inputs
Input type ___________________________ voltage opto-isolated
Input number ________________________ 4 with one common
Connection _________________________ PNP or NPN common for each group
Mechanics __________________________ extractable terminal which can be
Input voltage ________________________ 15 ... 30V DC
Input current _________________________ 4.5 ... 9mA
Hw delay time on the rise edge __________ 30ms
Hw delay time on the drop wire leading edge 60ms
—————— EXP-D6A1R1-AGy ——————
connected to a section of 0.14...1.5 mm
tab 5g
2
Advertisement
Table of Contents
