Choosing Images Individually - Canon PowerShot ELPH 300 HS User Manual

Choosing Images Individually

If you switch to Shooting mode or turn off the power before performing the
operations in Step 3, images will not be protected.
Choose [Select].
Follow Step 2 on p. 134 to choose [Select],
then press the m button.
Choose images.
Press the qr buttons to choose an image,
then press the m button.
will appear on the screen.
Press the m button again to deselect the
image. will disappear.
To choose additional images, repeat the
above procedure.
Protect the image.
If you press the n button, a
confirmation screen will appear.
Press the qr buttons to choose [OK], then
press the m button.
Protecting Images
135