Changing The Image Quality - Canon PowerShot ELPH 300 HS User Manual

Changing the Image Quality

You can choose among 4 different image quality settings.
Image Quality and Shooting Time per Memory Card
Image Recording Pixels,
Quality Frame Rate
1920 x 1080 pixels,
24 frames/sec.
1280 x 720 pixels,
30 frames/sec.
640 x 480 pixels,
30 frames/sec.
320 x 240 pixels,
30 frames/sec.
• Based on Canon's testing standards.
• Recording will automatically stop when the clip file size reaches 4 GB, or when the
recording time reaches approximately 10 minutes when shooting in
approximately 1 hour when shooting in
• Recording may stop even if the maximum clip length has not been reached on some
memory cards. SD Speed Class 6 or higher memory cards are recommended.
Black bars will appear on the top and bottom of the screen in
These areas will not be recorded when shooting.
112
Choose the image quality setting.
After pressing the m button, press the
op buttons to choose
m button again.
Choose an option.
Press the op buttons to choose an
option, then press the m button.
The option you set will appear on the
screen.
Content
For shooting full
high-definition movies.
For shooting
high-definition movies.
The image quality will be
higher when compared
with , but the recording
time will be shorter.
Since the file size is small,
shooting time will
increase, but the image
quality will decrease.
or
Memory Card Capacity
4 GB
Approx.
14 min. 34 sec.
Approx.
20 min. 43 sec.
Approx.
43 min. 43 sec.
Approx.
1 hr. 58 min.
19 sec.
.
, then press the
16 GB
Approx.
59 min. 40 sec.
Approx.
1 hr. 24 min.
54 sec.
Approx.
2 hr. 59 min.
3 sec.
Approx.
8 hr. 4 min.
30 sec.
or , and
or .