Table of Contents
Advertisement
Note1: These are initial characteristics.
Note2: Measurement conditions are as follows.
Ta = 25 C, VDD = 12.0V, IBL = 6.0mArms/lamp, Display mode: QXGA,
Horizontal cycle = 1/96.72kHz, Vertical cycle = 1/60.0Hz
Optical characteristics are measured after 20 minutes from working the product, in the dark
room. Also measurement methods are as follows.
LCD module
(Product)
Note3: See "4.14.2 Definition of contrast ratio".
Note4: See "4.14.3 Definition of luminance uniformity".
Note5: These coordinates are found on CIE 1931 chromaticity diagram.
Note6: Product surface temperature: TopF = 35 C
Note7: See "4.14.4 Definition of response times".
Note8: See "4.14.5 Definition of viewing angles".
50cm
Photodetector (BM-5A or SR-3)
1
DATA SHEET DOD-PD-1318 (4th edition)
NL204153BM21-01/01A
29
Advertisement
Table of Contents
