Advertisement
SERVICE
■
Have your power tool serviced by
a qualified repair person using
only identical replacement parts.
This will ensure that the safety of the
power tool is maintained.
■
Never service damaged battery
packs. Service of battery packs
should only be performed by the
manufacturer or authorised service
providers.
PALM SANDER SAFETY WARNINGS
■
Clamp workpiece with a clamping
device.
Unclamped
can cause severe injury and
damage.Do not hold the material you
are sanding by hand.
Do not use sanding paper larger
■
than needed. Extra paper extending
beyond the sanding pad can also
cause serious lacerations.
■
Ambient temperature range for tool
during operation is between 0°C and
40°C.
■
Ambient temperature range for tool
storage is between 0°C and 40°C.
■
The
recommended
temperature range for the charging
system during charging is between
10°C and 38°C.
ADDITIONAL SAFETY WARNINGS
■
The product is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience
and knowledge, unless they have
been given supervision or instruction
concerning use of the product by a
person responsible for their safety.
Children should be supervised to
ensure that they do not play with the
product.
■
Injuries
aggravated, by prolonged use of
a tool. When using any tool for
prolonged periods, ensure you take
regular breaks.
ADDITIONAL BATTERY SAFETY
WARNINGS
■
To reduce the risk of fire, personal
injury, and product damage due
to a short circuit, never immerse
workpieces
your tool, battery pack or charger
in fluid or allow fluid to flow inside
them. Corrosive or conductive fluids,
such as seawater, certain industrial
chemicals, and bleach or bleach-
containing products, etc., can cause
a short circuit.
■
Ambient
battery during use is between 0°C
and 40°C.
■
Ambient
battery storage is between 0°C and
20°C.
ambient
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance
with local and national provisions and
regulations.
Follow
on
transporting batteries by a third party.
Ensure that no batteries can come in
contact with other batteries or conductive
materials while in transport by protecting
exposed connectors with insulating, non-
conductive caps or tape. Do not transport
batteries that are cracked or leaking.
may
be
temperature
temperature
all
special
packaging
and
labelling
Original Instructions
caused,
or
range
for
range
for
requirements
when
5
Advertisement
