Panasonic SA-PM3E Service Manual page 13

Item
Mode Name Description
Doctor Mode To enter into
Doctor Mode for
checking of
various items and
displaying
EEPROM and
firmware version.
(For more
information, refer
to section 8.1.2)
Note: The micro-
processor version
as shown is an
example. It will be
revise when there
is an updates.
FL Display To check the FL
Test segments display
(All segments will
light up)
CD to Tape To Inspect the
Recording recording process
Test Mode from CD to TAPE
for the unit.
(For more
information, refer
to section 8.1.3)
Tape To Inspect the
Recording Tape recording
and Playing and playing is
process for unit.
(For more
information, refer
to section 8.1.4)
Tape Eject To check on the
test tape eject function.
FL Display
1.
2.
The Check Sum of EEPROM and
firmware version will be display for
1 sec.
* ROM correction
** Firmware version No:
13
Key Operation
Front Key
In any mode:
1. Press [
on main unit follow by [4] and [7] on remote
control.
To exit, press
on main unit or remote control.
In doctor mode:
1. Press [DIMMER] button on remote control.
To exit, press
on main unit or remote control.
In doctor mode:
1. Press [4] button on remote control.
To exit, press
on main unit or remote control.
In doctor mode:
1. Press [5] button on remote control.
To exit, press
on main unit or remote control.
In doctor mode:
1. Press [6] button on remote control.
To exit, press
on main unit or remote control.
] button
button
button
button
button
button