Allterco Robotics Shelly Motion 2 General User And Safety Manual page 7

ENGLISH
Do not allow children to play
⚠CAUTION!
with the buttons/switches connected to the
Device. Keep the Devices for remote control
of Shelly (mobile phones, tablets, PCs) away
from children.
4. Manual connecting to a local Wi-Fi
network
The Device can be managed and controlled
through its embedded web interface too.
Make sure Shelly Motion 2 is in AP mode.
Open the Device Web interface at
http://192.168.33.1 when connected directly
to the Device access point.
Click the Internet & Security button and then
select WIFI MODE - CLIENT.
Check the Connect the Shelly device to an
existing WiFi Network, enter the Wi-Fi net-
work name and password, and click SAVE.
Find your Device IP address in the Wi-Fi
network. You can use a simple tool to find
Shelly devices in the local network:
https://shelly.cloud/documents/device_
finders/ShellyFinderWindows.zip (Windows)
and https://shelly.cloud/documents/device_
finders/ShellyFinderOSX.zip (Mac OSX).
Enabling the Client mode
⚠IMPORTANT:
will disable the AP mode. In case you need
the AP mode again, press and hold the Reset
button for 5 seconds. Press and hold the
Reset button for 10 seconds to factory reset
the Device.
7
User and Safety guide