Specifications - Canon CanoScan LiDE210 Quick Start Manual

Color image scanner

Hide thumbs

page of 2

/ 2
Bookmarks

Enlarged version

Scanning in the Upright Position

This scanner can be used in the upright position. Use the supplied stand when scanning on the stand.

Setting the Stand

Positioning an Item

Put the scanner on the stand, fitting the two holes

Place a document on the document glass.

on the scanner side to the projections on the stand.

Lean the scanner toward the stand.

Close the document cover carefully to prevent the

document from moving over.

Fasten the stand hook to the marked position on the

scanner until it clicks.

Refer to "On-Screen Manual" for further information about ScanGear, MP Navigator EX, Scanner Buttons, and Troubleshooting. To start "On-Screen Manual",

double-click the on-screen manual icon on the desktop.

*In this guide, Windows 7 operating system Home Premium screenshots are used to illustrate explanations common to all operating systems.

Additionally, the every edition of Windows 7 is referred to as Windows 7, the every edition of Windows Vista operating system as Windows Vista, and Windows

XP Home Edition/Professional as Windows XP.

Specifications

Scanner Type

Sensor Type

Light Source

Optical Resolution

Selectable Resolution

Color

48 bit input (16bit input for each color (RGB)), 48 bit or 24 bit output (16bit or 8bit output for each color (RGB))

Scanning Bit Depth

Grayscale

Interface

Maximum Document Size

Scanner Buttons

Temperature

Operating Range

Humidity

Power Requirements

Power Consumption

Exterior Dimensions (W) x (D) x (H)

Weight

Optical Resolution represents the maximum sampling rate based on ISO 14473.

The fastest speed in Hi-Speed USB mode on Windows PC. Transfer time is not included. Scanning speed varies according to the document types, scan settings, or specifications of

the computer.

USB connection to PC.

• Specifications are subject to change without notice.

Model Name: K10353 (CanoScan LiDE 210)

FCC Notice (U.S.A. Only)

Model Number : K10353

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more

of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use of a shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC Rules.

Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made,

you could be required to stop operation of the equipment.

Canon U.S.A., Inc.

One Canon Plaza

Lake Success, NY 11042

1-516-328-5600

As an ENERGY STAR

Partner, Canon Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.

Warning

When you use this product, you should pay attention to the following legal issues:

• Scanning of certain documents, such as bank notes (bank bills), government bonds and public certificates, may be prohibited by law and may result in

criminal and/or civil liability.

• You may be required under law to obtain authorization from a person possessing copyrights or other legal rights to the item being scanned.

If you are uncertain of the legality of scanning any particular item, you should consult your legal adviser in advance.

• Microsoft is a registered trademark of Microsoft Corporation.

• Windows is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries.

• Windows Vista is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries.

• Macintosh and Mac are trademarks of Apple Inc., registered in the U.S. and other countries.

• Adobe, Adobe RGB and Adobe RGB (1998) are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.

• Other names and products not mentioned above may be registered trademarks or trademarks of their respective companies.

CANON U.S.A. INC.

One Canon Plaza, Lake Success, NY 11042 U.S.A.

CANON AUSTRALIA PTY LTD

1 Thomas Holt Drive, North Ryde, Sydney N.S.W. 2113, Australia

CANON NEW ZEALAND LIMITED

Akoranga Business Park, Akoranga Drive, Northcote, Auckland, New Zealand

Removing the Stand

To remove the scanner from the stand, press the

hook.

Release the scanner from the hook.

Lift the scanner off.

CanoScan LiDE 210

Flatbed

CIS (Color Contact Image Sensor)

3-color (RGB) LED

4800 x 4800 dpi

25-19200 dpi (ScanGear)

16 bit input /8 bit output

Hi-Speed USB

A4/Letter: 8.5" x 11.7" (216 x 297 mm)

5 buttons (PDF x 2, AUTO SCAN, COPY, E-MAIL)

5°C to 35°C (41°F to 95°F)

10% to 90% RH (no condensation)

Supplied via USB port (No external adapter required)

In operation: 2.5 W maximum, Stand-by: 1.4 W

, Suspend: 11 mW

9.9 x 14.4 x 1.6 in. (250 x 365 x 39 mm)

Approximately 1.6 kg (3.4 lbs.)

Escaneado en la posición vertical

Este escáner se puede utilizar en posición vertical. Cuando escanee en vertical, utilice el soporte incluido.

Instalación del soporte

Colocación de un documento

Coloque el escáner sobre el soporte, encajando los

Coloque el documento sobre el cristal de

dos orificios del lateral del escáner en las partes

documentos.

salientes del soporte.

Apoye el escáner sobre el soporte.

Cierre la cubierta de documentos con cuidado para

evitar que el documento se mueva.

Asegure el enganche del soporte en la posición marcada

en el escáner hasta que encaje.

Consulte el "Manual en pantalla" para obtener información adicional acerca de ScanGear, MP Navigator EX, los botones del escáner y la resolución de

problemas. Para iniciar el "Manual en pantalla", haga doble clic en el icono del manual del escritorio.

*En esta guía se utilizan capturas de pantalla del sistema operativo Windows 7 Home Premium para ilustrar las explicaciones comunes a todos los sistemas operativos.

Además, en ella nos referiremos a cualquier edición del sistema operativo Windows 7 como Windows 7, a cualquier edición de Windows Vista, como Windows

Vista; y de Windows XP Home Edition/Professional, como Windows XP.

Especificaciones

Tipo de escáner

Tipo de sensor

Fuente de luz

Resolución óptica

Resolución seleccionable

Entrada de 48 bits (entrada de 16 bits para cada color (RGB)), salida de 48 o 24 bits (salida de 16 u 8 bits para

Color

Profundidad de bits de

escaneado

Escala de grises

Interfaz

Tamaño máximo de documento

Botones del escáner

Temperatura

Rango de

funcionamiento

Humedad

Requisitos de alimentación

Consumo eléctrico

Dimensiones exteriores (An) x (Pr) x (Al)

Peso

La resolución óptica representa la frecuencia de muestreo máxima según la norma ISO 14473.

Velocidad máxima en el modo USB Hi-Speed en ordenadores con Windows. No incluye el tiempo de transferencia. La velocidad de escaneado varía en función de los tipos de

documentos, los ajustes de escaneado o las especificaciones del ordenador.

Conexion USB al ordenador.

• Las especificaciones pueden cambiar sin previo aviso.

Nombre de modelo: K10353 (CanoScan LiDE 210)

Como miembro de ENERGY STAR

, Canon Inc. ha determinado que este producto cumple las directrices ENERGY STAR de eficiencia

energética.

Advertencia

Cuando utilice este producto, tenga en cuenta los siguientes aspectos legales:

• El escaneado de determinados documentos, como billetes de banco (letras bancarias), bonos del estado y certificados públicos, puede estar prohibido

por ley y derivar en responsabilidades civiles o penales.

• Es posible que la legislación obligue a obtener autorización de la persona que posea los derechos de autor u otros derechos legales del elemento que

se vaya a escanear.

Si no está seguro de si puede escanear legalmente algún elemento en concreto, consulte primero a su asesor legal.

• Microsoft es una marca comercial registrada de Microsoft Corporation.

• Windows es una marca comercial o una marca comercial registrada de Microsoft Corporation en EE. UU. y/o en otros países.

• Windows Vista es una marca comercial o una marca comercial registrada de Microsoft Corporation en EE. UU. y/o en otros países.

• Macintosh y Mac son marcas comerciales de Apple Inc., registradas en EE. UU. y en otros países.

• Adobe, Adobe RGB y Adobe RGB (1998) son marcas comerciales o marcas comerciales registradas de Adobe Systems Incorporated en Estados Unidos y/o en otros países.

• Otros nombres y productos no relacionados anteriormente pueden ser marcas comerciales o marcas comerciales registradas de sus respectivas compañías.

Extracción del soporte

Para extaer el escáner del soporte, presione el

enganche.

Suelte el escáner del enganche.

Levante el escáner.

CanoScan LiDE 210

Escáner plano

CIS (Color Contact Image Sensor) (Sensor de imagen de contacto de color)

LED de 3 colores (RGB)

4800 x 4800 ppp

25-19200 ppp (ScanGear)

cada color (RGB))