Listening To The Radio; Using The Audio Input - Sylvania SKCR2826BT Instruction Manual

LISTENING TO THE RADIO

An FM antenna is built into the unit. To improve FM radio reception, adjust the position
of the unit.
1. Press the button to turn the unit ON.
2. Press the SOURCE button to select FM band, the FM frequency will show on
LCD display.
3. Press the SCAN
4. Use the
HOUR/TUN -
station. If you press and hold the
seconds, then release, the unit will automatically scan to the next broadcasting
station.
5. The broadcasting radio frequency will be displayed for about
reverting to the clock time.
6. Press the
TO SET/RECALL RADIO STATION PRESETS
1. Press the button to turn the unit ON.
2. Press the SOURCE button to select FM band, the FM frequency will show on
the LCD display.
3. Use the
HOUR/TUN -
station.
4. Press the CLOCK SET PREST button to enable the program function and the
preset channel number "P01" indicator will show on the LCD display and flashing.
5. Press the
HOUR/TUN -
channel number of program.
6. Press the CLOCK SET PREST button to confirm memory.
7. Repeat above steps #3 thru #6 to preset up to 30 stations for FM band.
8. To retrieve one of the preset stations already programmed, press
/ PLAY/PAUSE/SCAN button
station.

USING THE AUDIO INPUT

This unit provides an auxiliary audio signal input jack for connecting external audio
devices like MP3 players, CD players and listen to them through the speakers of this
unit.
1. Use an audio cable (not included) with one 3.5 mm stereo plug on each end of the
cable.
2. Plug one end into the AUX IN Jack on the main unit and the other end of the
cable into the Line-out Jack or Headphone Jack of your external audio device.
3. Turn on the unit and external audio device.
4. To select auxiliary audio input, tap the SOURCE button to select AUX IN mode.
"AUX IN" icon appears on display.
5. The volume level can now be controlled through the main unit. Operate all other
functions on the auxiliary device as usual.
button to tune the radio manually.
or MIN/TUN +
button to turn the radio OFF.
or MIN/TUN +
or MIN/TUN +
button to select the desired radio
HOUR/TUN -
button to select the desired radio
button to enter the desired
until you reach the desired preset number/radio
8
or MIN/TUN +
10 seconds before
button for 2