Table of Contents
Advertisement
SETTING THE CLOCK
1. With the power off, press the CLOCK SET/PRESET button. The hour on the display will
begin blinking.
2. Press the HOUR/TUN -
3. Press the CLOCK SET/PRESET button again to adjust the minutes. The minutes on the
display will begin blinking.
4. Press the HOUR/TUN -
5. Press the CLOCK SET/PRESET button again to finish setting the time.
SETTING TIMER
1. Press the TIMER button. the TIMER icon with time "10" will displayed
2. Press the TIMER buttons again to adjust the timer the timer time will count down
10 minute. Repeat to press this button to adjust the timer in decrements of 10
minute.
3. Press the HOUR/TUN -
increments/decrements of 1 min.
4. After the set time has expired, the under cabinet music system will sound an
alarm.
5. Press the TIMER button again to finish setting and will show the current time
BLUETOOTH OPERATION
ABOUT PAIRING
Pairing is the term used when two Bluetooth devices are connected wirelessly for
the first time. This allows the devices to see each other and sets up a one to one
communication channel between both devices.
To begin pairing with a Bluetooth device
1. Press the
button to turn on the unit.
2. Press the SOURCE button to select Bluetooth function and the icon
displayed and flash on LCD, you will hear the melody and start pairing process to
connect to your Bluetooth device.
3. Turn on Bluetooth function of your device and enable the search or scan function
to find SKCR2826BT (see your device's instructions to add or setup a Bluetooth
device).
4. Select SKCR2826BT from the device list when it appears on you device screen.
If required, enter the pass code "0000" to pair (link) SKCR2826BT with your
device.
5. Once paired with a device, the icon
sound "DOM" to confirm that pairing is tone beep sound confirms that pairing is
completed.
button to adjust the hour.
MIN/TUN +
button to adjust the minutes.
MIN/TUN +
or MIN/TUN +
will light steadily and your will hear the
6
buttons to adjust the timer in
will
Advertisement
Table of Contents
