Playing From A Bluetooth Device - Sylvania SKCR2826BT Instruction Manual

6. If you want SKCR2826BT change to pair with another Bluetooth device. Press
and hold the
the melody will be heard to confirm the unit will go into Pairing/Discoverable
mode again. Repeat steps 3 and 4.
To connect previously paired Bluetooth device
SKCR2826BT can store one previously paired device for quick pairing during power
on. When the unit is powered on and the previously paired device is found within the
operating range, the unit will pair the device automatically.
NOTE:
Due to different operating system of Bluetooth devices, the time taken by pairing
•
process might be different. If the pairing cannot be successful in the first time,
please try to restart the pairing process by pressing and holding the
button again until the icon
PAIR
The pairing time might be longer for the first time pairing or pairing a new
•
Bluetooth device.
Make sure you have the latest firmware for your Bluetooth devices.
•
Make sure your device is working properly. Check your device's manual for
•
details on Bluetooth pairing and linking.
Refer to manual of your cell phones, tablet PC, computer or other Bluetooth
•
enabled device for Bluetooth operation since it may vary from model to model.

PLAYING FROM A BLUETOOTH DEVICE

You can play music from your Bluetooth device wirelessly to SKCR2810BT after
pairing.
1. Selecting your favorite song, press the PLAY button on your Bluetooth device or
the PAIR button on SKCR2826BT to play or pause the Bluetooth device playback.
2. Adjust both the VOLUME +/- buttons of your SKCR2826BT and your Bluetooth
device until you reach a comfortable listening level.
Notes:
1. Your Bluetooth enabled device will not play the music through the speaker,
even if connected (linked), if the device does not support A2DP profile.
2. Remember to turn off the SKCR2826BT when you have finished listening, s et
button to the STANDBY mode.
the
3. Don't forget to switch off the power of your external audio device as well
button for about 4~5 seconds. The icon
PAIR
flash.
7
will flash,