Document Requirements; Scanning Range; Copy - Canon imageCLASS MF4570dw Basic Operation Manual

Document Requirements

• Plain paper
• Heavy paper
• Photograph
Document type
• Small documents (e.g., index cards)
• Special types of paper (e.g., tracing paper, transparencies, etc.)
• Booklet (Up to 3/4" (20 mm) thickness)
Size (W x L) Maximum 8 1/2" x 11 3/4" (215.9 mm x 297 mm)
Weight Maximum 4.4 lb (2 kg)
Paper Capacity 1 sheet
*1 When copying transparent documents such as tracing paper or transparencies, use a piece of plain white paper to cover the document after
placing it face-down on the platen glass.
*2 21 lb Bond (80 g/m
IMPORTANT
When placing document
Place the document after glue, ink or correction fluid on the document is completely dry.
To prevent paper jams in the feeder
Do not use any of the following.
• Wrinkled or creased paper
• Carbon paper or carbon-backed paper
• Curled or rolled paper
• Coated paper
• Torn paper
• Onion skin or thin paper
• Documents with staples or paper clips attached
• Paper printed with a thermal transfer printer
• Transparency

Scanning Range

Ensure your document's text and graphics fall within the area specified in the following diagram.
* Note that the margin widths listed below are rough standards and there may be slight variations in actual use.
* The loading orientation of documents is as follows.
- Platen glass: With the document facing down
- Feeder: With the document loaded in the document feeder tray

Copy

7/32 in.
(5.5 mm)
2-2
Platen glass
2 ) paper
Platen Glass
17/64 in.
(6.5 mm)
19/64 in.
(7.5 mm)
19/64 in.
(7.5 mm)
Feeder
Plain paper
(Multi-page documents of the same size, thickness and
weight/one page documents)
*1
Maximum 8 1/2" x 14" (216 mm x 356 mm)
Minimum 5 7/8" x 4 1/8" (148 mm x 105 mm)
13.3 to 27.9 lb Bond (50 to 105 g/m
Maximum 35 sheets *2
Feeder
15/64 in.
(6 mm)
2
)
17/64 in.
(6.5 mm)
5/16 in.
(8 mm)
5/16 in.
(8 mm)