10
7
Windows XP/2000
C
When the Network Setup of the Card Slot dialog box appears, specify
the drive letter, then click Next.
•
If the error message appears, refer to "5 The following screen is displayed
during setup" in the printed manual: Network Setup Troubleshooting.
8
USB
When the Setup Completion dialog box appears, remove the USB
cable, then click Finish.
•
To change the port name, click View Setup Results, then click Set Port
Name. For details, refer to "8 Changing the port name" in the printed
manual: Network Setup Troubleshooting.
•
If Unsafe Removal of Device is displayed, click OK.
Next, read "13 Information" on page 31!
Windows