Canon PIXMA MP980 Series Getting Started page 29

9
On the Connection Performance Measurement screen, click Next.
Measuring of the communication status starts, and the results are displayed.
• Measuring takes a few minutes. You can cancel measuring by clicking Cancel.
You also examine the detailed status of the communication link after setup by
using the Canon IJ Network Tool. For details, refer to the on-screen manual:
Advanced Guide.
10
Confirm the measurement results, then click Finish.
Ensure that is displayed in Connection performance between the printer and
the access point.
• If any symbol other than is displayed, refer to displayed comments and Help
for improving the status of communication link.
• To check whether the new location is better, click Remesurement. Measurement
of the communication status is performed again.
• When any message on Overall network performance appears in the
measurement results, rearrange the printer and other network devices following
the instructions on the screen.
Next, read "13 Information" on page 31!
Windows
E