Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Avent Security M700
Summary of Contents for Avent Security M700
- Page 1 FINGERPRINT DOOR LOCK M700...
-
Page 2: Product Guide
Product Guide Touch Screen Keypad Battery Fingerprint Sensor Lock Knob Micro-USB Port Cylinder Brief Introduction 1 There are 13 password users and 993 fingerprint users and RF card users available in the lock. 2 The password can be set with 6 to 10 digits. 3 There are single unlocking mode and double unlocking mode in the lock. -
Page 3: Installation
Installation Fold Front 35mm Side -245 -235 -225 35mm handle 35mm 20mm 20mm Fold 1.Place the template on the door. 2.Take out the mortise before 3.Adjust upper screw sleeve According to the template,mark drilling the holes. Drill the according to actual door hole the holes on the door with a door hole with a driller of position. - Page 4 Installation 6.Use one hand to press front 7.Adjust face plate position to 8.Install the battery box and faceplate against the door, make sure it is straightly batteries, test the deadbolt. fix back faceplate with 2 screws. and correctly installed. 9.Install the striking box 10.Test the installation by inner and striker.
-
Page 5: Operation
Operation Some Suggestions to Help Capturing the Fingerprint When placing the finger on the sensor, please make sure the “core” of fingerprint is staying in the main area of sensor directly with a little be pressure. Like the pictures show as following: Insert Image The sensor may not capture the correct fingerprint image if you take the following operations. - Page 6 Fingerprint Unlocking Place the finger on the sensor, the lock will be activated automatically and started to capture the fingerprint image for identification. Once the identification is passed, the keypad shows “Blue” light with sounds, then you can press down the handle for unlocking. “BLUE”...
- Page 7 Random Password Protection For a better security protection to the password user, the lock is designed with a random password protection. You can add any digits before and after the real password. For example, the password is “1234-5678”, you can unlock the lock by inputting the password as following: X X # 1 2 3 4 5 6 7 8 X X X X...
- Page 8 Operation Register Master User Press “SET” key in the battery case; For Fingerprint User: place the finger on the sensor twice, then finish registration; For Password User: input the password twice, For RF Card User: place the card finish by pressing “#” to confirm, on the reader once, then finish registration.
- Page 9 Register Normal User Master Activate the lock, and then press “*” Input the master user for authorization; and then press “#” to start the registration mode; (0~9) Press number “1” for registration; Input the group number (group 0 to 9) For Fingerprint User: For Password User: place the finger on the sensor twice;...
- Page 10 Delete Normal User Master Activate the lock, and then press “*” Input the master user for authorization; and then press “#” to start the registration mode; Press number “2” to delete users; Delete all users in the same group, press “1” and then press “#” to confirm; Delete single user, Delete all normal users, press “3”, press “2”, and then input...
- Page 11 Double Unlocking Mode For better security, you can set up the lock to double unlocking mode. When the lock is under double unlocking mode, you have to input 2 registered users every time for unlocking. Master Activate the lock, and then press “*” Input the master user for authorization;...
-
Page 12: Voice Setting
Voice Setting Master Activate the lock, and then press “*” Input the master user for authorization; and then press “#” to start the registration mode; Press number “3” , Press “2” , and then and then press “#” press “#” to voice setting to system setting;... -
Page 13: Passage Mode
Passage Mode When the lock is required to unlock frequently, set the lock to passage mode can let the people unlock the lock without any identification. *Enable: Unlock with registered user; Press “#” and “1” The passage mode is activated; *Disable: Activate the lock;... -
Page 14: Restore To Factory Default
Restore to Factory Default Press and hold the “SET” key Release the key when hearing in the battery case for some time; the lock says “initialization success” When the lock is reset to factory default, any fingerprint and password can unlock;...
Need help?
Do you have a question about the M700 and is the answer not in the manual?
Questions and answers