Returns to the most recently used TV or external input. You can get recommendations from various channels and programmes. You must log in to your LG account to get personalized content recommendations. You must connect to the network to use the recommendation feature.
Available features vary depending on the region or service. Manage Home Manage LG webOS TV Home You can change the order of the displayed apps or content lists by pressing the button on the remote control.
reset them, it takes some time to receive recommendations for contents again. Home Settings : When turning the power on, go to the screen that sets the Home behavior or advertising display. User Guide User Guide : Move to the app.
Page 8
Connect the LAN port of the TV and the router using a LAN cable. The router should be connected to the Internet beforehand. If the router supports DHCP, the TV is automatically connected to the network when you connect the TV to the network with a LAN cable. If the Network Is Not Automatically Connected Press the button on the remote control.
Page 9
Resetting the router may cause network connection problems. In this case, the router will operate normally if you turn it off and disconnect the TV, and then reconnect and turn it on. LG Electronics is not responsible for network connectivity or operation failure due to problems such as equipment failure or disconnected lines.
You can sign up for LG membership and log in with your email address in Account. Alternatively, you can sign up for LG membership using the ID and password of an external service account.
About User Guide About User Guide For information on each feature of the LG webOS TV, consult the User Guide available on the TV. You can check the description of the associated User Guide by clicking User Guide in the upper-right corner while using the app, or by clicking during setup in Settings.
The previously registered remote control is deregistered and then registered again. Unregistering Magic Remote If you have multiple LG Smart TVs and want to register the Magic Remote currently in use to another TV, you must unregister the previous one.
Page 13
For buttons with , please long-press (hold for more than a second). Quick Help : Launch ● GUIDE : Launch Guide ● GUIDE : Checking the saved programmes. : The Quick Access edit screen appears. ● : Display the additional buttons on the remote control. ●...
Page 14
then re-appear. The pointer will disappear if you press / / / buttons, and the remote will work as a standard remote control. You can control the TV by scrolling or pressing Wheel (OK) button in the middle of / / / buttons. When viewing a screen that requires scrolling, you can easily move up and down by scrolling the Wheel (OK) button.
Page 15
For buttons with , please long-press (hold for more than a second). Quick Help : Launch ● GUIDE : Launch Guide ● GUIDE : Checking the saved programmes. : The Quick Access edit screen appears. ● : Display the additional buttons on the remote control. ●...
the pointer disappears from the screen, shake the Magic Remote right and left. It will then re-appear. The pointer will disappear if you press / / / buttons, and the remote will work as a standard remote control. You can control the TV by scrolling or pressing Wheel (OK) button in the middle of / / / buttons.
Page 17
Some models may not be supported. Menu Language Location must be set as the official language of the country in to see correct search results. If Menu Language is not set as the official language, some functions may be limited. General System Language...
volume, pronunciation, accent, and talking speed) and the surroundings (noise and TV volume). To achieve accurate recognition of your speech, you must pronounce words in a slow and accurate manner at an appropriate voice volume at a distance of about 10 cm away from the Magic Remote’s microphone.
Page 19
If there are words similar to that which you spoke out loud, you may see a list of multiple results as shown below. If you do not get the results you want, press RETRY to try again. Select a result and it will be displayed on the text box. Cautions When Using Speech to Text Check the network connection before using the Speech to Text function.
Language . To temporarily switch to another speech recognition language, press the button in the voice recognition information display window. You can only use this function to agree to voice recognition terms. The Speech to Text rate may vary depending on the user’s characteristics (voice, pronunciation, intonation and speed) and the environment (noise and TV volume).
Press the (Amazon Alexa) button on the remote control to access the settings and help information for Amazon Alexa. Different services may run in countries where Amazon Alexa is not supported. Service operation and supported countries may change in accordance with Amazon’s policies.
Additional features can be set when you watch a live broadcast. Available features may vary depending on the broadcast signal. More Actions The types of buttons appearing on the vary, depending on the region and the type of connected device. Using Universal Remote Control Automatically Setting the Universal Remote Control When you set up the universal remote control, you can control the peripherals (Blu-...
You can purchase the Magic Remote separately if it is not provided. Some models may not be supported. When changing settings on a device, make sure it is powered on first. To set up a universal remote control with the latest information, connect to the network and accept the User Agreements.
Selecting a number that has already been registered allows deregistering it. When you select a number that has not been registered, items that can be registered will be shown. An item that has been registered to a different number is indicated with a check mark. You can view a brief instruction for this function.
This feature works only with devices with the logo. Check for the SIMPLINK logo on the external device. Use of any product other than those specified may cause problems during operation. ® To use SIMPLINK, you need to use a high-speed HDMI cable with CEC (Consumer ®...
Connect your keyboard to the USB port. You can enter text with the connected keyboard device. It is not possible to enter text on some screens. It is recommended that you use a product that has been tested for compatibility with LG TVs. Logitech K360, Logitech K400, Logitech K750 You can change the input language by pressing the language switch key or the right Alt key, And also can change by pressing the Ctrl key and the Space key at same time.
Controller, Logitech F310, Logitech F710 Connecting Bluetooth Input Devices You can connect and use devices such as a Bluetooth-enabled keyboard, mouse, or a gamepad with your TV. To see the details, click the Settings Devices External Devices Connect Bluetooth Controller User Guide.
TV Scheduler : You can enter the time and date of a programme to schedule watching or recording it at the set time. To see the details, click the Enjoy Live TV Using TV Scheduler User Guide Recordings : You can check the recordings stored in the storage device and play the recordings.
Select each area to access the corresponding feature. You can view information on the programme and broadcaster. You can view information about the programme you are currently watching as well as the focused programme information. Select the button or the title of the desired programme. You can view more information on the programme and perform Watch Record...
appears. You can move the banner's position by pressing the button on the remote control and selecting Change Banner Location. If your remote control does not have a button, press and hold the button. It displays the information about the programme you are watching. Select a programme banner to enter the detailed information pop-up to see the detailed programme information or run additional features related to the banner.
Page 31
watching. Information may vary depending on the programme. Some models may not be supported. You must connect to the network and agree to User Agreements before you use it. Entering Who.Where.What? Method 1. Press the Wheel (OK) button on your remote control. Press Who.Where.What? on the programme banner.
Pressing the button allows you to share the address of the website containing the information through a text message, QR code, or the LG ThinQ app or send it to a smart device. To use the sharing feature, the smart device must have the latest version of the LG ThinQ app installed on it and must be connected to the TV.
Page 33
previously if you go out for a while. Input the USB HDD in the USB port. Press the button on the remote control and select Live Playback. If your remote control does not have a button, press and hold the button.
Some models may not be supported. Recording Using Instant Recording Connect a USB HDD or USB stick to a USB port. It is recommended that you record to a USB HDD. Press the button on the remote control and select Record. If your remote control does not have a button, press and hold the button.
Because of the content protection technology used, the recorded video cannot be played on PCs or other TV models. Also, the video cannot be played if the TV’s video circuit is replaced. Do not remove the USB cable while recording. If you force your TV to power off while recording, the recorded content may not be saved.
Page 36
Using the TV Scheduler You can enter the time and date of a programme to schedule watching or recording it at the set time. Press on the remote control to select Live TV and view the live broadcast. Press the button on the remote control and select Scheduler.
Page 37
If you want to record a live broadcast, click the Record Watch button. In case of an upcoming programme, click the Scheduled Recording Reminder button. Record Scheduled Recording may not be supported on some models. Scheduled recording does not guarantee exact recording time of the programme because the programme will be record as the information of broadcaster.
Playing Recorded TV Programs Managing Recordings You can view and play recordings stored on storage devices by using the Recordings app. Live TV by pressing . Press the button on the remote control and select Recordings. If your remote control does not have a button, press and hold the button.
You can set features such as Resume and the audio language that can be outputted. A list of recordings is shown below. The configurable items differ depending on model. Watching Internet Channel (LG Channels) Watching Internet Programme You can watch real-time broadcasts through this service over the Internet.
Press the button on the remote control and select Channels. You can also watch LG Channels by pressing the (Programmes) / buttons on the remote control. You can use the ’Interactive Programme’ service that enables users to conveniently enjoy content related to the current programme without having to switch apps.
Page 41
Colour button To select the preceding or following page. Number button Enters the page number to move to. (Programmes) / Button To select the preceding or following page. Some models may not be supported. Special Teletext Function Press the button on the remote control. If your remote control does not have a button, press and hold the button.
Select this menu to display concealed information, such as solutions to riddles or puzzles. Update Displays the TV picture on the screen while waiting for a new teletext page. The display will appear at the top left hand corner of the screen. When the updated page is available then display will change to the page number.
services in addition to traditional digital teletext services, all directly on to the TV in a seamless experience. HbbTV services can be activated in a number of ways, the most popular being pressing the . Users typically explore services with the traditional navigation keys (including the OK button and the ).
This function enables you to watch some encrypted services (pay services). ● If you remove the CI Module, you cannot watch pay services. ● CI (Common Interface) functions may not be possible depending upon the country ● broadcasting circumstances. When the module is inserted into the CI slot, you can access the module menu. ●...
Page 45
Apps and Content Content Search User Guide To see the details, click the You can log in to your LG account. You can manage apps, such as updating or deleting installed apps. Closes the app. To turn off the app from running in the background, press the...
Page 46
Content Recommendation You can get content recommendations based on the programme you are watching or TV viewing patterns. If you are watching the TV using a set-top box, you must complete the setup of the universal remote control to use the recommendation feature normally. For more information, see How to Operate TV Using Universal Remote Control User...
Page 47
Press the button on the remote control. Launch Search for a variety of content and information using the desired search terms. Enter a search term. Shows recent searches. You can select one from the suggested keywords and proceed to search. You can browse content by genre.
Page 48
User Guide for more information on the action. You can log in or out with your LG ThinQ account. Edit Inputs : You can edit the name of the connected device or apply the related settings. Edit home IoT devices...
Page 49
Log in to your LG ThinQ account. A list of the registered LG ThinQ devices will appear. If you are in an area where the LG ThinQ app is not in service, LG ThinQ device connection will not be supported.
Page 50
Home IoT Devices . You can connect and see devices registered with your LG ThinQ account or IoT devices. Once the device is connected, the card will be changed to a smaller size and appear at the bottom of the device connection list.
Page 51
Run the LG ThinQ app installed on your smart device. Follow the instructions from LG ThinQ app to connect your smart device to the TV. When your account information of LG ThinQ is linked to the TV, you can manage...
Page 52
View All Simple remote control operation is possible. Select and try using the remote control in full screen. You can share and enjoy the sound, screen, or content on the TV and smart device interactively. Displays a list of apps installed on the TV. Displays a list of devices connected to the TV's external input.
Page 53
Some controls may be limited in external input mode. The app’s screen and functionality are subject to change without prior notice. Available features may differ depending on your country and OS. Watching Smart Device Screen on TV Watching Smart Device Screen on TV Enable Screen Share mode on the smart device.
Page 54
Playing Sound from a Smart Device through the TV’s Speakers Playing Sound from a Smart Device through the TV’s Speakers Connect a smart device to the TV via Bluetooth to play sound from the smart device through the TV’s speakers. Turn the smart device’s Bluetooth on, then select the TV from the list of devices.
Page 55
and a rated current of 500 mA or less. If you use a device requiring a higher voltage/current than the rated voltage/current, it may not operate properly due to lack of current. It is recommended that you use a USB hub or USB storage device with a power supply. We recommend using a storage device with a capacity of 32 GB for the USB memory and 2 TB or less for the USB hard disk.
Page 56
You can select a device connected to your TV. Displayed only when music is playing. Press the to access the Play Music screen. Search Launch View Type : Selects a content display mode. Sort : Select the option to sort content. Group : If you filter by Music...
Page 57
Shows the previous content. Starts the slide show. Shows the next content. Rotates photos. Enlarges or reduces the photo. 360-degree photos can be viewed in 360 degrees. Using the 360° VR Play on a normal photo may distort the image. Some models may not be supported.
Page 58
Shows the previous video. Plays or pauses the video. Shows the next video. You can change subtitle settings. Rotates videos. Fast-rewinds the video at higher speeds. You can do the settings related to play on repeat of the video. Fast-forwards the video at higher speeds. 360-degree videos can be viewed in 360 degrees.
Page 59
a song. You can set the random play mode. You can set the repeat play mode. Lyrics are available for music files that provide them. In some music files, you can choose a lyric section and move the playback position. The lyrics feature is only supported on some devices.
Page 60
Enter the IP address, User Name, and Password of the PC you wish to connect to, and select Connect to connect the PC. The screen of the connected PC will be displayed on the TV screen and can be operated with the TV remote control. Both TV and PC can be connected only after network connection and settings are set.
Page 61
Select “OK” to save the settings. Select the connected PC in the Home Dashboard app on the TV, and then select and play the file you want. To play on other operating systems or devices, refer to the manual of the operating system/device.
Connect Wireless (Windows 10) Click the Notification Centre icon on the taskbar on the PC screen and select Connect. Select the TV you want to connect to and request the connection. After the connection is established, the TV will display the screen of the connected It is recommended that you always update your device to be connected to your TV to the latest OS version for a reliable connection.
To Use Magic Explorer To Use Magic Explorer You can run a search conveniently through various apps based on on-screen text or video information. Magic Explorer can be used if the pointer colour of the Magic Remote changes (e.g., to the ). Press and hold the Wheel (OK) button on the image if you are watching a...
Page 64
Press the button on the remote control. Select on the screen. You can select a screen layout. Side by Side : You can view two apps on a split-screen. : You can run another app on top of the current screen and view it as a pop-up screen. You can choose which app you wish to run alongside the app that is currently running.
You can operate the sub-screen. You can select the screen of which to output sound. Change to Side by Side mode. Closes the app. Using Side by Side Mode You can operate the selected screen. The sound of the selected screen is output. Change to mode.
View the built-in images for each theme. You can view the information and image of the focused theme in advance. You can delete a downloaded theme or select the desired theme to play. Closes the app. To turn off the app from running in the background, press the button on the remote control and select Quit App...
Page 67
You can refresh the web page you are viewing. You can type in a web address to navigate to a specific website or enter a search term directly. You can view the tabs that are currently open. You can zoom in or out on the screen while browsing the website. Block Ads : You can block ads within the web page you are viewing.
Page 68
Media in formats other than JPEG/PNG/GIF may not be played. ● Apps may be forced to shut down if the TV runs out of memory. ● The fonts provided on the TV are used. Depending on the content, characters may look ●...
Page 69
LG Electronics headquarters (Korea). The submitted information will only be used to improve the Web Browser performance.
Select Camera. For a detailed description of the camera’s functions, refer to the device's manual. The camera must be purchased separately. It is recommended that you use a product that has been tested for compatibility with LG TVs. Logitech C920/C920s/C922 Pro/C922x/C925e/C930c/C930e Depending on the installation status of the TV, the camera may not be mounted on the TV.
Using Sports Alert Using Sports Alert Press the button on the remote control. Run the Sports Alert app. You can view the list of teams by league and detailed information. Press to register your preferred team or player. By registering a team or player, you can view live scores and upcoming match schedules.
This service is provided for only select content with contracted partners. Settings Quick Settings To Use Setting Function Quickly Set of light-weight controls quickly and simply such as Picture Mode, Sound Out, Game Optimiser and so on. Press the button on the remote control. Picture Mode You can set You can set...
Page 73
You can add/delete the quick setting items or change their order. Wheel (OK) Move to an item that can be set up, press the remote control's button once, Wheel (OK) and then press and hold the button to move to the menu. The configurable items differ depending on model.
Picture Selecting Picture Mode Picture Select Mode Select the picture mode that is best suited to your viewing environment, preferences or video type. Select a picture mode. By adjusting and setting each item in more detail based on the mode, your video is better optimised for its characteristics. The configurable items differ depending on model.
Page 75
Provides optimized Cinema Picture quality certified by UHD Alliance, the standard setting body for UHD-related technologies. To auto-switch to FILMMAKER MODE when a signal that can be operated with this mode is entered, set FILMMAKER MODE Auto Start Expert (Bright space, daytime) Expert (Dark space, night) This mode is suitable for movies, etc.
Page 76
Depending on the input signal, the available picture modes may be different. When watching online service content, the Picture Mode may be changed to match the content being shown. Expert is an option that allows a picture quality expert to fine-tune the quality of the standard picture.
Page 77
The picture may get distorted while zooming in or out. Selecting a different screen size from the original size may cause the image to look different. Depending on the combination of picture format and screen size, the edges may be hidden or shown in black, or both sides of the picture may flicker.
Page 78
Saving Energy Saving Step Minimum and set to Depending on your TV model, it might not have the OLED Pixel Brightness setting. Adjust Contrast Adjusts the contrast of the bright and dark areas of the picture. The closer to 100, the higher the contrast.
Page 79
Turning this option may increase energy consumption. Motion Eye Care Automatically adjusts brightness and reduces image blur based on image data to reduce eyestrain. Turning this option may increase energy consumption. Depending on the input signal or the selected picture mode, the available options may differ.
Page 80
Sets the Colour Gamut to Adobe RGB standards. Fine Tune This is used when experts control it by using a test pattern. You can control it by selecting areas of six colours (Red/Green/Blue/Cyan/Magenta/Yellow). For normal images, adjustments may not result in noticeable colour changes. Colour Adjustment Adjusts the Colour and saturation of the picture to make the image more Colourful and lively.
Page 81
Signal Level(%) Select screen brightness for color temperature adjustment. Method is set to 10 Points Signal Level(%), you can select brightness using numbers indicating 10 levels. When the Method is set to 22 Points Signal Level(%), you can select the brightness with the 22 levels of brightness.
Page 82
Removes small dots that stand out so as to make the image clean. MPEG Noise Reduction Reduces the noise produced during the creation of digital video signals. Smooth Gradation It reduces the phenomenon that the outline of the image is rugged and in a staircase pattern and displays a smoother screen.
Resetting Picture Mode Picture Advanced Settings Reset If you want to reset the image settings to the factory defaults after configuring the image settings, select reset for each image mode. FILMMAKER MODE Auto Start Picture Advanced Settings FILMMAKER MODE Auto Start If set to On, Picture Mode will automatically be changed to...
Page 84
Depending on the content you watch, you can enjoy the optimised sound and virtual surround in real time. Standard Optimises the sound for all types of content. Cinema Optimises the sound for cinemas. Clear Voice Clear Voice Pro Boosts voice clarity. Sports Football Cricket...
Page 85
For some Bluetooth devices, the device volume can be controlled by selecting from the ● connection list. LG Sound Sync devices will automatically try to connect to the recently used devices ● when you turn the TV on. We recommend that you connect an LG audio device that supports LG Sound Sync, ●...
Page 86
For more information on the purchase of WiSA authorized products, check on www.wisaassociation.org. Mobile Device If you install the LG ThinQ app on a smart device and connect it to your TV, you can use the device as a speaker for the TV. Use Wired Speaker...
Page 87
Sound Sound Out Use External Speakers with TV Speaker Audio can be played through the multiple devices simultaneously. Bluetooth Device + TV Speaker Both the internal speaker of the TV and the Bluetooth speaker can be used to output the sound at the same time or a surround sound can be used.
Page 88
Dolby Atmos is based on the concept of audio objects. Any sound can be mixed as a single audio element, an object, that’s independently placed in three-dimensional space. Your new LG TV has been enabled with the latest Dolby Atmos sound technology. Dolby Atmos is the ultimate sound experience which creates moving audio that flows around you using TV speakers.
Page 89
Restores the detailed effect settings for the Standard sound mode to the initial settings. HDMI (eARC/ARC) This setting only applies to the internal speakers of the TV or Sound Mode Share connected devices that support Installation Type Sound Advanced Settings Installation Type This mode optimises the sound based on the TV setup.
Page 90
Some models may not be supported. Adjusting AV Synchronization Sound Advanced Settings Match Screen and Sound Adjusts the synchronization of the sound from the speaker that is working. The closer the value is set to 60, the slower the voice output speed will be than the default speed.
Page 91
Sync device using a TV remote control. If the auto-power feature of the sound bar that supports LG Sound Sync is set to On, the sound bar will be turned on or off together when the TV is turned on or off.
AI Picture Pro General AI Service AI Picture Pro When set to On, artificial intelligence, which has been trained with LG Electronics’ deep learning techniques, finds the most suitable resolution according to the video type and displays it using vivid, realistic, and rich colours.
Page 93
AI Brightness Settings General AI Service AI Brightness Settings Set to On. AI adjusts the dark areas according to the brightness around your TV and specific contents. AI Genre Selection General AI Service AI Genre Selection When set to On, the image quality is automatically optimised for the genre of the content by the artificial intelligence.
Page 94
This mode provides a clean and natural sound. Bass Boost AI Acoustic Tuning : Selecting this option outputs -adjusted audio with an ● emphasis on bass. Treble Boost : Selecting this option outputs AI Acoustic Tuning -adjusted audio with an ●...
using an app. Next Picks You can get recommendations based on your TV viewing patterns. This feature may not be available in some countries. Sports Alert Move to the Sports Alert app. You can check information about sports events and set alarms.
Page 96
Bluetooth Device WiSA Speakers Optical Out Device HDMI(ARC) Device . Switch to Use TV Speaker or change Sound Advanced Settings Select HDMI Input Audio Format The configurable items differ depending on model. Game Game Genre You can optimise the screen depending on the genre of the game. OLED Motion OLED Motion Pro You can make your video clearer by eliminating afterimages.
Page 97
This reduces screen cracking and video lagging during game play. VRR & G-Sync NVIDIA's display adaptive sync technology adjusts frames to minimize screen tearing and stuttering. AMD FreeSync Premium AMD's display adaptive sync technology adjusts the injection rate to minimize screen breaks and stuttering.
Adjust Sharpness Adjusts the sharpness of the image. Colour Depth Tones down or up the colours displayed on the screen. Dynamic Tone Mapping Suitable contrast settings based on image brightness of the HDR content. Reset You can reset the settings. Wide Aspect Ratio You can set the screen ratio optimised for the game.
Page 99
Turns off the Care Picture Settings. Comfort Mode Displays the picture with normal contrast, brightness and sharpness levels. Theatre Mode Suitable picture for movies. Kids Care Mode It adjusts the blue light to make the screen easier for children to view. Device Self Care It provides multiple features to optimise the TV’s condition.
Page 100
Some models may not be supported. : Turns off the Energy Saving Step ● Minimum Medium Maximum : Use the power saving feature according to ● Energy Saving Step set on TV. Minimum Brightness You can set how dark the screen is when the Energy Saving Step is set to Auto.
Adjust Logo Brightness Adjust the luminance of static images such as logos within content to correct potential picture quality issues. Care Recommendations You can turn the Care Recommendations ON or OFF. Family Settings Usage Limits Setting General Family Settings Usage Limits Setting You can use the TV in the set time period only.
Volume Limit Mode HDMI may not work for audio devices connected to the optical digital/ (eARC/ARC) /headphone port. Screen Time Reports General Family Settings Screen Time Reports You can check your TV usage time. Programmes Automatically Setting Up Programme General Programmes Programme Tuning (Programme Tuning & Settings) Auto Tuning Automatically tunes the programmes.
Page 103
Speed at which a device such as modem sends symbols to a programme. Modulation Loading of audio or video signals onto carrier. Network ID Unique identifier allocated for each user. Start Frequency (kHz) Enter a user-defined start frequency range. End Frequency (kHz) Enter a user-defined end frequency range.
Page 104
LNB Power To enable the power supply for the LNB, select On. If you select Off, Motor Type disabled. DiSEqC When using DiSEqC, select one option from A~D/ToneA~B. If you use DiSEqC, Unicable and Motor Type are disabled. Unicable Select On to use Unicable and set the Unicable in the Unicable Settings menu.
Page 105
Set the motor movement to east or west to have the motor move only within the direction set. On : You can limit the movement to the current direction by selecting the West/East. ● Off : You can cancel the limit you set. ●...
Page 106
Some models may not be supported. Service providers or regions are subject to change, and the services can be terminated without prior notice. Programme List Update General Programmes Programme Tuning & Settings Programme List Update It updates the changed Programme List information by based on country broadcasting circumstance and satellite.
Page 107
Set the sorting option. Lock / Unlock : Lock the selected programmes or unlock the locked programmes. Skip / Restore : Set the selected programmes to be skipped when switching programmes, or disable the skipping option of the programmes previously set to be skipped.
Page 108
Select the desired programmes from the all programmes list and press the button to add them to the favourite programmes list. Delete the selected programmes from the favourite programmes list. Move : Select one or more programmes in the Preferred Programmes list, press the Move button, and then select the position to move it to.
Copy Programmes General Programmes Copy Programmes Export your TV’s programme list information to a connected USB storage device or Import your TV’s programme list information from a connected USB storage device. For Satellite models Network Setting a Wired Network General Network Wired Connection (Ethernet) If the router connected to the network supports the DHCP feature, connecting the TV and router by wire will automatically connects to the network.
IP address information. In addition, you can change the IP address and DNS server address you want to connect to by pressing the Edit button. For more information on how to connect to the network, see Getting Started with LG webOS TV Connecting to the Network User Guide Devices Setting TV...
Page 111
When a device you've connected before is turned on, it automatically connects to your TV. To disconnect the existing connection, click Disconnect. It is recommended that you use a product that has been tested for compatibility with LG TVs. Bluetooth Mouse : Logitech M535, Logitech MX Master 2S, Apple Magic Mouse2...
Page 112
Turn on via Wi-Fi/Turn on via Wi-Fi(Networked Standby Mode) Turn on via Bluetooth/Turn on via Bluetooth(Networked Standby Mode) is set to On, you can turn on your TV using an application that supports TV On With Mobile. The TV should be connected to a network. The TV and the device to be used should be connected to the same network.
Page 113
8 bit 10 bit 12 bit 3840 × 2160p YCbCr 4:2:0 YCbCr 4:2:0 YCbCr 4:2:0 4096 × 2160p 59.94 YCbCr 4:2:2 YCbCr 4:2:2 YCbCr 4:2:2 YCbCr 4:4:4 RGB 4:4:4 4K @ 100/120 Hz Support Format (120 Hz models only) Resolution Frame rate (Hz) Colour Depth/Chroma Sampling 8 bit...
HDMI IN You can only change the settings of the you are watching at the time. You can specify a different setting for each HDMI port. SIMPLINK (HDMI-CEC) You can conveniently control and use various multimedia devices connected through HDMI with the TV remote control. To see the details, click the How to Operate TV Connecting to SIMPLINK (HDMI- CEC)
Page 115
Postcode This function is used to set the broadcast location of the TV by entering your postcode. LG Services Country If you don’t set the Automatically, you can select the country manually. You must set the country manually when you are not connected to the network.
Page 116
Custom Time Zone When select the Custom Time Zone, Custom Time Zone menu is activated. Timers Sleep Timer Sets the TV to turn off at a specified time. If you do not want to use Sleep Timer, select Off. Power On Timer Power On Timer to On.
Page 117
Setting Safety General System Safety You can put a lock on TV broadcasts or apps. Set it to to apply the lock. TV Rating Locks This function operates according to information from the broadcasting station. Therefore if the signal has incorrect information, this function does not operate. Prevents children from watching certain adult’s TV programmes, according to the ratings limit set.
Page 118
Enter the numbers “0313” in the master password input window, then press OK. The password will be reset. Managing Your LG Account You can sign up for LG membership and log in with your email address in Account. For more information, see...
Page 119
Home Settings General System Additional Settings Home Settings Home Auto Launch You can set Home to launch automatically when turning on the TV. Home Promotion You can turn on or off the advertisements on the Home screen. The configurable items differ depending on model. To Set Power Indicator General System Additional Settings Standby Light You can turn the standby light on or off.
Page 120
No personally identifiable information is tied to this cookie. Limit AD Tracking If set to On, personalised advertisements based on user interests may not be provided. Reset AD ID User interest information is newly collected, and advertisements are provided according to the information. Some models may not be supported.
You can set a number (ID) to manage multiple TVs. This feature is for administrators. It is not recommended for use in a typical home environment. Restoring the Default Settings General System Reset to Initial Settings Return TV to its initial settings. After reset, the TV will automatically turn off and on. Reset All All items on the TV are changed to their default settings.
Page 122
Pitch Adjust the tone of spoken guide. This feature is available on certain languages only. Some models may not be supported. The configurable items differ depending on model. For visually impaired users. Audio Guidance TV Power Sound Setting the automatically switches the (only available on certain models) to as well.
Page 123
certain colours in some menus. Set to On. To Set Subtitle General Accessibility Subtitles View subtitles when the TV station provides subtitled programming. Change Subtitles and select subtitle setting. Some models may not be supported. Applies to Digital broadcasting. Menu for the Visually Impaired General Accessibility Audio Description The contents on the screen will be described with voice for visually impaired viewers.
Some models may not be supported. To Set Hard of Hearing Press the button on the remote control. Select General Accessibility. Subtitles to On. Hard of Hearing to On. A caption will be provided for the hearing-impaired. Hard of Hearing When the is turned , it will be prioritized over the general captions.
Page 125
maintain optimal functionality. While the software is updated the screen of your device may, in the absence of any user interaction within 4 hours, turn off, but the device will not completely enter standby mode until the installation is finished. This can result in an increased power consumption during software update.
Page 126
● LG Remote Service You can get help for troubleshooting through the remote control. LG Remote Service, make sure to contact the LG Electronics Customer Service Center. This function may not be available in some countries or models. Quick Help...
Page 127
This is because there is a noise-removal process to eliminate any possible noise that may appear during power-on. This does not mean the product is defective. The pointer of Magic Remote is not appear in the screen. Hold the remote control towards the TV and press the buttons at the same time for more than 5 seconds until instructions appear.
Page 128
Replace the batteries in the remote control. (Use alkaline batteries.) Check if there are any obstacles blocking the signal in front of the connected device’s remote control receiver. Troubleshooting Screen Issues Troubleshooting Screen Issues If you experience any of the problems below while using the product, please check the following: There may be no problem with the product.
Page 129
The screen shakes after the momentary appearance of vertical/horizontal lines and net pattern. Connect wireless telephones, hairdryers, electrical drills, etc. to a different power outlet. The problem may be caused by high-frequency electronic devices such as another TV or strong electro-magnetic sources nearby. Each programme has a different image quality.
Page 130
I don’t see anything, or the image keeps flickering when I try to connect the HDMI cable. ® Check whether your HDMI cable is compliant with the specifications. You may ® experience flickering or a blank screen if the HDMI cable is faulty (bent, broken).
Page 131
With some HDMI cables, signals may not be received. Change the settings of the connected device to the supported signal. Troubleshooting Sound Issues Troubleshooting Sound Issues If you experience any of the problems below while using the product, please check the following: There may be no problem with the product.
Page 132
company’s transmission signal. Please have your broadcasting services provider (wired/cable) diagnose the problem. Sound Advanced Settings If all programmes are out of sync, go to Match Screen and Sound and adjust the sync. If you are using a set-top box, consult its supplier. The volume changes when I change the programme.
Page 133
If you experience any of the problems below while using the product, please check the following: There may be no problem with the product. The screen remains blank after it is connected to a PC. Check that the PC is properly connected to the TV. Turn the TV off and back on using the remote control.
Page 134
More information about supported files can be found in Being Aware of the Information Supported Video File Formats in the User Guide. I cannot find a file in the Media Player. Check whether the files saved on your USB storage device can be read by the PC. Check that the file extension is supported.
Page 135
(You can check the language of the subtitle file by opening the file in the Notepad.) If subtitles encoding is incorrectly set, subtitles may not be displayed properly. Press the button on the remote control during video playback actions. Select Code Page change the value.
Page 136
on the TV. Programmes from the set-top box cannot be recorded. Protected content is not recorded. Scheduled Recording possible even if the TV is off? Scheduled Recording starts and completes recording at the set time even if the TV is off.
Page 137
Check the connection status of the TV, AP (Router) and cable modem. Power off and power on in the following order; 1. Turn your cable modem off and back on, and wait for the device to reset. 2. Turn the wired/wireless router off and back on, and wait for the device to reset. 3.
Page 138
I wish to delete the account saved on the TV. When you log in to your LG account on the TV, the account will be saved to the TV. You can delete accounts stored on the TV at any time, as follows.
Page 139
Usage Data Management. Pressing Delete will delete the usage history. I wish to close my account on the TV. You can also close your LG account on the TV as follows. Select General System LG Account. Select Account Management for the account you wish to set up.
Page 140
Troubleshooting Internet Browser Issues Troubleshooting Internet Browser Issues If you experience any of the problems below while using the product, please check the following: There may be no problem with the product. Some parts of a particular website are not visible when I am using the Internet. Web Browser supports only HTML5 media and not Flash Plug-in.
Page 141
Supported Photo File Formats Supported Photo File Formats File Format Format Resolution jpeg, jpg, jpe JPEG Minimum : 64 × 64 Maximum Normal Type : 15360 (W) × 8640 (H) Progressive Type : 1920 (W) × 1440 (H) Minimum : 64 × 64 Maximum : 5760 (W) ×...
Page 142
HFR video (HFR supported models only) ● HEVC 3840 × 2160@120P Main/Main10@L5.2 Maximum 60Mbps Dolby Vision video (Dolby Vision supported models only) ● HEVC 3840 × 2160@60P Main/Main10@L5.1 Maximum 50Mbps HEVC 7680 × 4320@60P Main/Main10@L6.1 Maximum 100Mbps (8K models only) 8K video (8K models only) ●...
Page 143
Streams that include Global Motion Compensation (GMC) and Quarterpel Motion Estimation (Qpel) are not supported. ULTRA HD video (ULTRA HD models only) : 3840 × 2160, 4096 × 2160 Some HEVC-encoded ULTRA HD videos other than the content officially provided by LG Electronics may not be played.
Page 144
Some codecs can be supported after a software upgrade. Extension Codec mkv/mp4/ts Video H.264/AVC, HEVC Audio Dolby Digital, Dolby Digital Plus, AAC Only Window Media Audio V7 and later are supported. The AAC main profile is not supported. Video files created by some encoders may not be played. Video files in a different format than specified may not be played properly.
Page 145
Support Channels mono, stereo Bit rate 64 kbps ~ 320 kbps Sample freq. 8 kHz ~ 48 kHz Support Vorbis Channels mono, stereo Bit rate 128 kbps ~ 320 kbps Sample freq. 8 kHz ~ 48 kHz Support Channels up to 6 ch flac Bit rate Sample freq.
Page 148
67.43 29.97 67.5 112.5 134.86 59.94 7680 × 4320p 107.89 23.97 (8K models only) 131.87 29.97 263.74 59.94 1) Supported when HDMI Deep Colour is set to 4K. 2) Supported when Wide Aspect Ratio is set to 21:9. 3) Supported when Wide Aspect Ratio is set to 32:9.
Page 151
131.87 29.97 263.74 59.94 1) Supported when HDMI Deep Colour is set to 4K. 2) Supported when HDMI Deep Colour is set to 8K. 3) Supported when HDMI Deep Colour is set to Off. 4) Supported when Wide Aspect Ratio is set to 21:9.
Page 152
The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by LG Electronics Inc. is under license. Other trademarks and trade names are those of their respective owners. Quickset...
Page 153
Apps on Premium area are arranged in accordance with the yearly app usage (no. of ○ app access) among LG Smart TV users by country. No. of apps may vary from 7 to 20 by each year's platform and the arrangement cannot be customized.
Page 154
Magic Link Recommendations on the Magic Link page recommends content such as YouTube, ● channels and additional information that is similar to the information (title, genre, description, cast, director and etc.) of the programs that the user is watching currently.