Table of Contents
Advertisement
Service and maintenance
WARNING! Read "Safety Information" on page 2 before servicing the product.
WARNING! Disconnect the product from AC mains power and allow cooling down for at least
10 minutes before handling.
WARNING! Refer any service operation not described in this user manual to a qualified service
technician.
WARNING! Incorrect insertion of the powerCON TRUE1 may cause electrical contact
misalignment resulting in equipment malfunction and/or personal injury.
ATTENTION! Interval of inspections should be determined according to the frequency of use
and the working scenario of the product.
ATTENTION! Signs of malfunction or poor operation should always lead to an inspection of the
product, and the unit should be taken out of operation until the error is eliminated.
Spare parts
Only parts ordered at or approved by Wahlberg should be used in the product to ensure function
and stability. Contact Wahlberg to inquire about spare parts.
On-site service
On-site service and maintenance can be provided by the Wahlberg Motion Design, giving owners
access to Wahlberg Motion Design's expertise and product knowledge in a partnership that will
ensure the highest level of performance throughout the product's lifetime. Please contact
Wahlberg Motion Design for details.
Maintenance plan
The results of all the regular inspections are to be documented and kept available at the
company. The written result of the last inspection must be kept available at the site of
operation, e.g. by an inspection sticker on the product showing the date of the inspection, the
basis of the inspection and the name of the inspector.
Before every use and weekly
Every time when rigging the product, before operating the product – and at least every week
when the product is in use:
Check all external wiring and connectors to motor, brake and sensors.
Monthly
At regular intervals – but at least every month when the product is in use:
Check the mounting clamp and snap hook for damages and proper fastening.
Change damaged parts according to this manual.
Yearly
The product must be inspected by a specialist every 12 months.
Every 48 months
The product should be inspected by an authorised expert every 48 months.
255.805.001
31
Date: 2021-03-12
Advertisement
Table of Contents
