Menu Navigation Mode - Wahlberg 255.700 User Manual

Extended mode = ACCDCC
Shows the acceleration and deceleration of 10%
Extended mode = PIDS
Shows each of the PID values from 0 to 5000 representing a setting of 0-100%.
Holding down the
values in the memory of the AC motor controller.
This feature is used for easy and fast tuning of the motor control in extended modes, with the
option to return to the default mode with the same performance and safer control in daily use.
Shift back to the previous screens by pressing

Menu navigation mode

The display shows:
In menu navigate mode, the different parameters can be changed.
In menu navigate mode the motor is stopped, and DMX input has no effect, but the motor can
still be manually controlled by the MAN FWD/REV menu though.
Press the arrows
The bottom line of the display is showing:
Adjusting menu parameters
The display shows:
255.805.001
button 5 sec. while these views is shown will save the DMX controlled
or to go up or down in the menu choices.
19
for 3 sec.
Date: 2021-03-12