Canon VIXIA HF M301 Instruction Manual page 170

e Cannot convert
- Cannot access the memory card. Check the memory card and make sure it is inserted cor-
rectly.
- You inserted a MultiMedia Card (MMC) into the camcorder. Use a recommended memory card
(0 37).
- There was an error creating the file name. Set 8
initialize the memory card or delete all the photos (0 103) and all the scenes in the [For Web
Upload] and [For DVD Burning] index screens (0 57).
e Cannot copy
- The total size of the scenes you selected to copy exceeds the available space on the memory
card. Delete some recordings on the memory card (0 57, 103) or reduce the number of
scenes to copy.
- The memory card already contains the maximum number of scenes (3,999 scenes). Delete
some scenes (0 57) to free some space.
Cannot divide the scene. Initialize only using the camcorder.
- The scene could not be divided because the camcorder's internal scene management data log
is full. Save your recordings (0 127) and initialize the memory (0 41). Write back the
backup files and try dividing the scene again.
Cannot edit
- Could not move a scene in the playlist. Delete some scenes from the playlist (0 96).
Cannot enter standby mode now
- The camcorder cannot enter standby mode if the remaining battery charge is too low. Charge
or replace the battery pack (0 23).
Cannot play back
- There is a problem with the memory. If this message appears often without apparent reason,
contact a Canon Service Center.
e Cannot play back Cannot access the built-in memory
- There is a problem with the built-in memory. Save your recordings (0 129) and initialize the
built-in memory using the [Complete Initialization] option (0 41). If the problem persists,
contact a Canon Service Center.
Cannot play back Check the memory card
- There is a problem with the memory card. Save your recordings (0 129) and initialize the
memory card using the [Complete Initialization] option (0 41). If the problem persists, use a
different memory card.
e Cannot play the movies in the built-in memory Initialize only using the camcorder
- The camcorder's built-in memory was initialized using a computer. Initialize the built-in mem-
ory with this camcorder (0 41).

170
Additional Information
8
[Photo Numbering] to [Reset] and