Canon VIXIA HF R10 Pocket Manual page 34

Quick Start Function
IMPORTANT
• Do not disconnect the power source during standby mode (while the ON/
OFF (CHG) indicator is lit in orange).
NOTES
• If you close the LCD panel under some circumstances (for example while
the memory card slot cover is open or when the battery charge is too low),
the camcorder may not enter the standby mode. Check that the indicator
changes to orange.
• The camcorder will power off automatically if left in standby mode for 10
minutes. In that case, press
select the length of time until shut-off or turn off the Quick Start function.
[Power Saving Mode]
See
• You can use the Quick Start function also in the flexible recording mode in
the same manner.
34
POWER
to turn on the camcorder. You can
( 138) for details.