Table of Contents
Advertisement
All specs are measured according to IHF 202 CEA 490-AR-2008 standard. THD is measured using AP AUX 0025 passive filter and AES 17 active filter.
AUDIO SPECIFICATIONS
LINE IN/HEADPHONE OUT
THD (20 Hz – 20 kHz)
Signal-to-Noise Ratio
Frequency response
Output impedance
LINE IN/SPEAKER OUT
Continuous output power into 8 ohms and 4 ohms
THD (20 Hz – 20 kHz)
Signal-to-Noise Ratio
Clipping power (at 1 kHz 0.1 % THD)
IHF dynamic power
Damping factor
Frequency response
Channel separation
Maximum input level
Input sensitivity (for 40 W in 8 ohms)
Standby power
PHONO IN/SPEAKER OUT
THD (20 Hz – 20 kHz)
Signal-to-Noise Ratio
Frequency response (RIAA deviation)
Maximum input level
Input sensitivity (for 40 W in 8 ohms)
DIMENSION AND WEIGHT
Gross dimensions (W x H x D)
Net weight
Shipping weight
Gross dimension includes feet, volume knob and extended rear panel terminals.
Specifications are subject to change without notice. For updated documentation and features please log onto www.nadelectronics.com for the latest information about your C316BEE.
<0.03 % in 300 ohms at 2 V out
>100 dB (A-weighted, 32 ohms, ref. 2V out, unity gain)
±0.3 dB (20 Hz - 20 kHz)
68 ohms
40W (ref. 20 Hz-20 kHz at rated THD, both channels driven)
<0.03 % (250 mW to 40 W, 8 ohms and 4 ohms)
>95 dB (A-weighted, 500 mV input, ref. 1 W out in 8 ohms)
>97 dB (A-weighted, 500 mV input, unity gain in 32 ohms)
>45 W in 8 ohms
>60 W in 4 ohms
8 ohms: 90 W
4 ohms: 120 W
2 ohms: 170 W
>200 (ref. 8 ohms, 1 kHz)
±0.3 dB (20 Hz - 20 kHz, Tone Defeat ON)
Treble: ± 5dB at 10 kHz
Bass: ± 8 dB at 100 Hz
>70 dB (1 kHz)
4.3V (1 kHz THD 0.1%)
200 mV
<0.5 W
<0.03 % (1 W to 40 W, 8 ohms and 4 ohms)
>75 dB with IHF MM cartridge (A-weighted, ref. 5mV input 1 kHz and 1W output in 8 ohms)
±0.3 dB (20 Hz - 20 kHz, Tone Defeat ON)
Note: The RIAA response is consistent with a pre-emphasis that is rolled off at 50kHz by a
second order filter, such as used in Neumann cutting lathes.
71 mV (1 kHz THD 0.1%)
2.95 mV
435 x 90 x 285 mm
17 1/8 x 3 9/16 x 11 1/4 inches
5.5 kg (12.1 lbs)
6.4 kg (14.1 lbs)
REFERENCE
SPECIFICATIONS
11
Advertisement
Table of Contents
