Table of Contents
Advertisement
Cannot divide scenes
- You cannot divide scenes recorded or edited using another device. Also, you cannot divide
scenes that are from movies converted to standard definition (&/% only) or MP4
movies.
- The memory is full. Delete some recordings (A 60, 120) to free some space.
Cannot copy scenes/photos
- You may not be able to copy scenes/photos recorded or edited using another device.
Cannot mark individual scenes/photos in the index screen with a checkmark !
- You cannot select more than 100 scenes/photos individually. Select the [All Scenes] or [All
Photos] option instead of [Select].
Indicators and Onscreen Displays
After ê lights up in yellow and you turn off the camcorder, it cannot be turned on again.
- The battery charge has become low or the battery pack is exhausted. Replace or charge the
battery pack.
lights up in red.
- Battery pack is exhausted. Replace or charge the battery pack.
appears on the screen.
- The camcorder cannot communicate with the optional battery pack attached so the remaining
battery charge cannot be displayed.
* lights up in red.
- A memory card error occurred. Turn off the camcorder. Remove and reinsert the memory
card. Initialize the memory card if the display does not change back to normal.
- The memory card is full. Replace the memory card or delete some recordings (A 60, 120)
to free some space on the memory card.
Even after stopping recording, the ACCESS indicator does not go off.
- The scene is being recorded in the memory. This is not a malfunction.
The red ON/OFF (CHG) indicator flashes rapidly (
intervals).
- The temperature of the battery pack is outside its operating range (approximately 0 – 40 °C
(32 – 104 °F)). Remove the battery pack, warm it or let it cool down, as necessary, and try
charging it again.
- Charge the battery pack in temperatures between approximately 0 °C and 40 °C (32 °F and
104 °F).
- The battery pack is damaged. Use a different battery pack.
- Charging has stopped because the compact power adapter or the battery pack is faulty. Con-
sult a Canon Service Center.
190
Additional Information
one flash at 0.5-second
Advertisement
Table of Contents
