Table of Contents
Advertisement
To enter text for the various settings, use the virtual keyboard (A 88).
POINTS TO CHECK
• You may need to know in advance the encryption key and other set-
tings of the wireless router. Refer to the wireless router's setup screen or
ask the network administrator.
1 Set the camcorder to playback mode and then press
2 Set up a new connection point.
[
Wi-Fi]
Desired connection point ([
New]*
* To replace the settings of an existing connection point, touch [Edit] instead and
then manually change the settings. To delete the settings, touch [Delete] and
then [Yes].
• You can set up up to three connection points for infrastructure mode
([
1] to [
without any further settings.
• The camcorder will automatically detect available nearby Wi-Fi
networks and display their SSID.
3 Touch [Í] or [Î] to select the desired access point and then
touch [OK].
• Wi-Fi networks with a stealth function that do not broadcast their
network name will not be detected by the camcorder. To use such an
access point, touch [Enter Manually] and perform the procedure
described in To manually enter a wireless access point (A 155).
• If the desired access point is protected, the C icon will appear next
to the network name. In such case, continue to step 4; otherwise,
skip to step 5.
4 Touch the [Encryption Key] control button to enter the encryption
key or password of the wireless access point and then touch [OK].
• If the encryption method of the wireless access point is set to WEP,
the WEP index key will appear on the screen. Select the same index
key of the access point.
154
Wi-Fi Functions
>
[Wi-Fi Setup]
>
[Manual Setup]
3]). Once set up, you can use the same Wi-Fi network
>
[Network Setup]
1] to [
3])
.
>
>
[Set Up
Advertisement
Table of Contents
