Advertisement
Product Overview
Heater
Body
• Assembly
). After removing from the packaging,
1
turn the heater upside down and
gently place on a scratch free surface
on the floor.
2). Remove the two support feet from
the packaging along with the retaining
screws.
3). Position the feet so the inner holes
align with the holes in the heater and
use a screw driver to securely tighten
the screws in position.
4). Carefully invert the heater to the
correct orientation.
WARNING - Never operate without the support feet attached or upside down, this
may cause permanent damage or present a fire risk.
Kensington.
Support
Feet
7
Handle
Control panel
On/Off control switch
Remote Control Storage
AFTER.SALES SUPPORT
8' Qg)
0800 422 274
Advertisement
