Component Descriptions; Ethernet Ports - Aerohive AP410C Hardware User's Manual

6/15/2020

Component Descriptions

Status Light
The status light conveys operational states for system power, firmware updates, Ethernet and wireless
interface activity, and major alarms. The AP410C has two status lights on the top of the chassis. At
setup, this light cycles through the following sequence:
Solid White: The power is on and the device is operational.
Solid Amber: The device is on and is booting..
Blinking Amber: The device is performing a firmware upgrade.
Dark: The power is off.
Light Sensor LED
The AP410C also has a light sensor on the top of the device.

Ethernet Ports

Two RJ45 Ethernet ports (Eth0 and Eth1) automatically negotiate half- and full-duplex connections with
the connecting device. Eth0 is 100/1000/2500 BASE-T, and Eth1 is 10/100/1000 BASE-T. These ports are
autosensing and adjust to straight-through and crossover standard Cat5 or better Ethernet cables
automatically. The AP receives power through an Ethernet connection to the ETH0 port from PSE
(power sourcing equipment) that is compatible with the 802.3at and 802.3at standards.
USB Port
The AP410C has a USB port that you can use to connect USB-based beacons (iBeacon, for example)
and IoT (Internet of Things) devices. To access the port, remove the screw that secures the protective
cover.
Micro USB Console Port
Through the Console port, you can make a serial connection between your management system and
the AP. When you connect to the device using the micro USB Console port, the management station
from which you connect to the device must have a VT100 emulation program, such as Tera Term Pro
(a free terminal emulator) or Hilgraeve HyperTerminal
from XP forward).
You can order a Micro USB console adapter cable for this AP here.
The serial connection settings are: 9600 bits per second, 8 data bits, no parity, 1 stop bit, no flow
control.
The pin-to-signal mapping for the Console port is shown below:
docs.aerohive.com/330000/docs/help/english/ng/Content/hardware/ap/ap410c.htm
AP410C Hardware User Guide
®
(provided with Windows
©
®
operating systems
7/18