Canon EF 14mm f/2.8L II USM Instruction
Ultrasonic ef lens
Hide thumbs
Also See for EF 14mm f/2.8L II USM:
- Instructions (2 pages) ,
- User manual (5 pages) ,
- Instructions (2 pages)
Related Manuals for Canon EF 14mm f/2.8L II USM
Summary of Contents for Canon EF 14mm f/2.8L II USM
- Page 1 EF14mm f/2.8L II USM Instruction...
- Page 2 Thank you for purchasing a Canon product. The Canon EF14mm f/2.8L II USM is a high- performance super wide-angle lens designed for EOS cameras. ¡“USM” stands for Ultrasonic Motor. Conventions used in this instruction Warning to prevent lens or camera malfunction or damage.
- Page 3 a Safety Precautions a Safety Precautions • Do not look at the sun or a bright light source through the lens or camera. Doing so could result in loss of vision. Looking at the sun directly through the lens is especially hazardous. •...
-
Page 4: Table Of Contents
Nomenclature Distance scale (→ 5, 6) Built-in lens hood Infrared index (→ 6) Depth-of-Field scale (→ 6) Distance index (→ 5) Gelatin filter holder (→ 7) Contacts (→ 4) Focusing ring (→ 5) Focus mode switch (→ 5) Lens mount index (→ 4) For detailed information, reference page numbers are provided in parentheses (→... -
Page 5: Contacts
The lens mount has a rubber ring for enhanced water- and dust-resistance. The rubber ring may cause slight abrasions around the camera's lens mount, but this will not cause any problems. If the rubber ring becomes worn, it is replaceable by a Canon Service Center at cost. ENG-4... -
Page 6: Focusing Ring
2. Setting the Focus Mode To shoot in autofocus mode, set the focus mode switch to AF. To use only manual focusing, set the focus mode switch to MF, and focus by turning the focusing ring. The focusing ring always works, regardless of the focus mode. -
Page 7: Distance Scale
4. Infrared Index The infrared index corrects the focus setting when using monochrome infrared film. Focus on the subject manually, then adjust the distance setting by moving the focusing ring to the corresponding infrared index mark. Some EOS cameras cannot use infrared film. See the instructions for your EOS camera. -
Page 8: Gelatin Filter Holder
6. Filter Holder There is a gelatin filter holder at the rear of the lens. Cut the gelatin filter to fit within the white frames. Then insert the gelatin filter into the filter holder. ¡Only one filter can be used. ¡When you use a gelatin filter, ghosting may appear in the image. - Page 9 ¡The EF1.4X II/EF2X II extender, the EF12 II/EF25 II extension tube, and 250D/500D close-up lenses cannot be used with this lens. ¡Aperture settings are specified on the camera. ¡All data listed is measured according to Canon standards. ¡Product specifications and appearance are subject to change without notice. 24 × 36 mm 14 mm f/2.8...
- Page 10 CT1-7573-002 © CANON INC. 2007 2009.7...