OTS XB--80 Manual page 11

Dongguan Xin Bao Instrument Co., Ltd
1 PTN NO: NO. 1~127 optional
2 PTN NAME: Set name in Chinese/English
3 PTN TYPE: 4 modes optional
CYCLE/END:
Total circles of the segment/Operation function after ending the segment.
AFTER STOP
4
AFTER STOP
READY
STOP
5 SV: Set value of each segment
6 TIME(H): Set time of each segment. Unit: Hours
7
TIME(M): Set time of each segment. Unit: Minutes
8 SV+: Compensation temp of each segment. Such us:
1. High temp set value is 100 ℃ , compensation temp is 10 ℃ . Total
storage value is 110℃.
2. Low temp set value is -20℃, compensation temp is 5℃. Total storage
value is -25℃.
9
TS1,TS2: Set output type of each segment. Press TS1/TS2
10 NEXT: Enter PROG SET 2
Add: The 3rd Industrial Zone, Chashan Town, Dongguan. Tel: 0769-33365786 www.ots-testequipment.net
Stops after normal temp shock
Stops after defrosting
Machine is in hot and cold energy storage state.
Stops after the last shock test
9
See pic 6
See pic 6
See pic 6-1~4
See pic 6-1~4
See pic 6
See pic 6
See pic 6
See pic 6
See pic 6-1~4
See pic 6