Table of Contents
Advertisement
Dongguan Xin Bao Instrument Co., Ltd
1
Display current temp of test chamber
2
Program is optional from NO. 1~ NO. 127. It can not be set under testing
3
SP value: Set temperature in thermal shock
4
MV value: PID output value in tetsing
5
CYCLE: set/ actual cycle
6
RUN TIME: Thermal shock time of current phase
7
SEG TIME: Set time for current phase
8
PRS TIME: Total running time since the machine starts operating.
9
KEEP: Click this button the test will stop timing.
10
STEP: 3 conditions to skip the segment
1. Press 'STEP' and enter run statement when machine is saving energy.
2. The machine do not time if the temp is not reached to requirement in testing.
Press 'STEP' it starts timing.
3. Press 'STEP' to enter the next segment when the machine is under testing and
timing.
11
Cold shock→Hot shock /Red part is running time
12
Hot shock→ Cold shock
13
Cold shock→RT→Hot shock
14
Hot shock→RT→Cold shock
15
NEXT: Enter detailed monitoring screen
Add: The 3rd Industrial Zone, Chashan Town, Dongguan. Tel: 0769-33365786 www.ots-testequipment.net
Pic 3-5
4
See Pic 3
See Pic 3-1
See Pic 3
See Pic 3
See Pic 3
See Pic 3
See Pic 3
See Pic 3
See Pic 3
See Pic 3
See Pic 3-2
See Pic 3-3
See Pic 3-4
See Pic 3-5
See Pic 3
Advertisement
Table of Contents
