Table of Contents
Advertisement
Follow Step (1) to Step (4) described in section 6.2.4.
Follow Step (1) to Step (3) described in section 6.2.5.
Step 1: Disconnect the connector CP502.
Step 2: Remove the AC Inlet P.C.B. by pulling the P.C.B. support claw as arrow shown.
Step 3: Desolder the terminals of IC601, Transistors Q601 and Q602.
Step 4: Disconnect the connectors CN601, CN602 and CN603 and remove the Amplifier P.C.B.
Step 5: Remove 4 screws.
17
PDF created with pdfFactory Pro trial version
www.pdffactory.com
Advertisement
Table of Contents
