Table of Contents
Advertisement
Step 3: Disconnect the connector CN507 to detach the rear panel.
Step 4: Remove 2 screws from the rear panel.
Step 5: Lay the rear panel flat and remove the fan unit as arrow shown.
6.2.6. Disassembly and checking of the Amplifier P.C.B. and AC Inlet P.C.B.
Follow Step (1) to Step (4) described in section 6.2.4.
Follow Step (1) to Step (3) described in section 6.2.5.
15
PDF created with pdfFactory Pro trial version
www.pdffactory.com
Advertisement
Table of Contents
