Other Convenience Functions - JVC LT-32A2 Instructions Manual

Other convenience functions

You can change the default settings to convenience use.
Selected Items
Picture
Picture Mode
Brightness / Contrast / Sharpness / Color / Tint
(available only when you selected "Favorite" at
Picture Mode)
Backlight
(available only when you selected "Favorite" at
Picture Mode)
Color Temperature
Noise Reduction
Reset
Sound
Sound Mode
Bass / Treble / Balance
(Bass / Treble are available only when you
selected "Favorite" at Sound Mode)
Surround
Stable Sound
Reset
Channel
Standard
Dynamic
Natural
Favorite
Off / Low / Middle / High
Standard / Movie / Music / Speech
/ Favorite
On / Off
On / Off
Setup hint
Standard picture quality (factory-set)
Enhanced picture contrast and sharpness (factory-set)
Intended for bad-quality signals (factory-set)
Your personal preferences
You can adjust the picture to your preference.
• Tint is available in NTSC-signal mode or Component/
HDMI-signal with 60Hz.
• In PC mode, Sharpness and Tint are not available.
You can use the Backlight feature to adjust the screen
brightness for improved picture clarity.
Normal (Neutral) / Warm (Reddish) / Cool (Bluish)
Sometimes it is not possible to input a high-quality HD
signal. The actual signal input is too small and noisy,
e.g. a video film in letterbox format, or a noisy analogue
cable TV signal. This feature can slightly reduce
interferences caused by the faulty input signal.
• This option is not available in 1080i/p and PC mode.
Select "Reset" to reset Picture options to the factory
preset values.
You can change the sound mode setting. If you select
"Favorite", you can change the setting of Bass and
Treble and TV memorizes your setting.
You can adjust the sound quality to your preference.
The Surround-Sound feature processes the audio signal
to expand the listening field wider and deeper to create
a 'pseudo surround-sound' from the TV's speakers.
The feature works with stereo signals from TV broadcast
or AV input.
This will automatically adjust volume so each channel
and input has the same average volume level.
Select "Reset" to reset Sound options to the factory
preset values.
See page 9-10.
13