Table of Contents
Advertisement
Stereo reception in analogue cable
TV channel mode
You can see the each signal type you selected on
the TV-screen when you press .
•
In receiving the signal of US Mono, US Stereo or US
MTS, the broadcast sound type will be displayed. To see
the sound system you selected, press AUDIO I/II once.
When 2-channel sound reception is available,
you can select your preferred audio with the
AUDIO I/II.
Each time you press AUDIO I/II, the sound channel
will switch to the alternative channel available.
Note:
•
In case of bad reception, the stereo sound also can be
disturbed.
•
The broadcast sound type may not be saved if Power
off.
Channel Lock Setup
1
Press MENU. Select Lock option in "Feature"
menu, then press .
2
'Password' will appear. Press '0 0 0 0' using
the Number buttons (0-9). (This is the default
password.)
Lock: To activate the "Lock" feature in "CH Lock",
select On with / , then press ENTER.
Change PIN Code:
•
Old Password
Enter the current password with Number
buttons.
•
New Password
Enter your chosen new password (please
call Service, if you have forgotten the new
number).
•
Confirm New Password
After you have entered the new password,
you need to enter the same password again
for confirmation.
3
Press RETURN several times to return to the
normal screen.
While toggling between channels, if a channel
which you have set the Lock to On is selected,
the channel will be locked. The password entering
screen will appear. Then enter the password to view
that channel.
12
Picture Format
Picture Size
The required picture format can be set by pressing
the PICTURE SIZE button. Press PICTURE SIZE
until the required format is displayed.
You move through the following formats when you
press the button: 4:3, 16:9, Cinema, Real (HDMI
mode only).
Other formats
Press PICTURE SIZE until the desired size is
reached.
4:3
The picture is displayed in 4:3
format with black bars to the
right and left.
16:9
The width of the picture will be zoomed evenly.
Cinema
Use Cinema to increase a small 4:3 letterbox signal.
4:3 Letterbox picture increased to Cinema format.
Real (HDMI mode only)
All images are displayed on the
TV screen of 16:9 ratio without
overscanning.
Note:
•
In PC mode, the picture size feature is available only for
16:9 or 4:3 format.
•
During the playback of a movie file in MEDIA mode,
picture size feature is not available.
Depending on the file, the image might be seen a
horizontal expansion.
Advertisement
Table of Contents
