Door Reversibility - Brandt BFU4351SW Instruction Manual

Door Reversibility

1. Remove the 2 screws on the back:
2. Carefully lift the top cover 5 cm away from the freezer, and then pull out the terminal. Then remove
the top cover away:
3. Remove the three screws, and then remove the upper hinge that holds the door in place. Lift the
door and place it on a padded surface to prevent it from scratching:
4. . Remove the screws and bottom hinge. Then remove the adjustable feet from both sides:
5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it:
6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable feet:
7. Deatch the freezer door gasket and then attach it after rotating.
8. Place the door back on. Ensure the door is aligned horizontally and vertically so that the seals
are closed on all sides before finally tightening the top hinge: