Mobil Tv Instructions; Ac Adaptor Specifications - Telefunken E24H345A Instruction Manual

Mobil TV Instructions

Switching the TV On Using 12 Volt
1. Connect the cigarette lighter plug cable into the cigarette lighter socket of your car.
2. Plug the other side of 12 volt cable into DC 12 socket on the back side of the TV. Then the standby LED
will light up.
3. Press the Standby button, Programme +/- buttons or a numeric button on the remote control or press the
middle of the side function switch on the TV in. The TV will then switch on.
4. Adjust the antenna position for better reception or reinstall TV channels if necessary.
Switching the TV Off
1. Press the Standby button on the remote control or press the middle of the side function switch on the TV
in and hold it down for a few seconds, so the TV will switch into standby mode.
2.
Unplug cable connectors and power plugs.
ATTENTION: 12 V Input

AC Adaptor Specifications

Manufacturer Name
Model Identifier
Input Voltage (V)
Input AC Frequency (Hz)
Output Voltage (V)
Output Current (A)
Output Power (W)
Average Active Efficiency
Efficiency at Low Load (%10)
No-load Power Consumption (W)
V+
V+
V-
V-
MOSO POWER SUPPLY TECHNOLOGY CO., LTD
MSA-Z4000IC12.0-48W-Q S7017-Q0
100-240
50-60
12,0
4,0
48,0
% 87,8
% 79,0
0,10
English - 35 -