Automatic Reception; Displaying And Selecting The Setting Mode - Westfalia RETOX 97 09 47 Instruction Manual

Automatic Reception

1. In the normal display mode (current time and date)
keep the button RESET pressed for some seconds
until the display shows REC Auto. On the lower part of
the display ON or OFF is flashing. Press START to
select ON or OFF.
2. Select ON. The watch is now set to automatic
reception mode.
3. Press RESET to turn to normal display mode.
4. In the normal display mode keep the button START
pressed until the display shows a flashing antenna in
the left side of the display. The watch tries to receive
the German radio clock signals. This will take several
minutes. During reception, do not transport the
watch. Time correction will be carried out during the
day.
If the antenna disappears from the display without
setting the correct current time, radio reception is
weak or not possible at this location. Please try at
another place or set the current time manually.
Displaying and Selecting the Setting Modes
1. In the normal display mode press the button MODE
to switch to the following modes:
Each setting mode is identified by an abbreviation
(except of the normal display mode). The order of the
setting modes are:
Current Time and Date – Stopwatch (STW) –
Alarm (ALM) – Countdown Timer (TMR) – Dual
Operation
13