Vitesy Natede Basic Quick Manual page 12

→ Quick Guide Natede Basic
To change the fan mode, keep your hand steady in
front of sensor A .
➀ Silent (fan at 25% and LEDs off): the lowest band of
LEDs lights up as indicated;
➁ Standard (fan at 50% and LEDs on): the low and
mid-range of the LEDs light up as indicated;
➂ Performance (fan at 100% and LEDs on): the whole
LED band is on as indicated;
➃ Off: fan and led are off.
Once you remove the hand, the LEDs flash 2 times to
confirm the selection. To see the currently selected
mode, just pass your hand in front of sensor A and the
LEDs will flash for 1 second.
12