Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Rohnson R-893
Summary of Contents for Rohnson R-893
- Page 1 R-893 Portable Air Conditioner User’s Manual...
- Page 2 Thank you for choosing this mobile air conditioner to provide you and your family with all of the “Home Comfort” requirements for your home, cottage or office. The appliance can be moved from room to room within your home and set-up in just minutes. It is a multi-functional room air exchanging, air-processing appliance, designed to offer you the functions of: Air conditioner, Dehumidifying, Independent Fan.
- Page 3 5. Unplug air conditioner before servicing. 6. Use two or more people to move and install air conditioner. 7. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capability or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Page 4 Control panel 2. Signal Receptor Cold Air Outlet 4. Remote Controller 5. Transport Handle 6. Air Outlet Hose 7. Evaporator Air Intake 8. Primary Drain Port The figures in this manual are based on the external view of a standard model. Consequently, the shape may be different from that of the air conditioner you have selected.
-
Page 5: Control Panel
Control Panel This section explains proper mobile air conditioner operation. Push buttons Power button Speed button Timer/ Temperature up button Timer button Mode button Timer/Temperature down button Sleep button low. High fan speed Automatic, Cool, Dehumidify, Fan Control Panel Operation ⚫... - Page 6 Press “+” or “– “button to increase or decrease the temperature 1℃ by pressing once. The unit LED shows the target temperature for 5 seconds and then displays the room temperature 4.Adjust Fan Speed Press the “ “button to select a desired fan speed shown as below: 5.Power When you press “...
- Page 7 previous setting). The set temperature will increase 1℃ after one hour and increase 2℃ after two hours. After six hours the unit will stop running. Child lock operation 1. Press and hold the button for 5seconds, the buttons will be locked. Press and hold the button for 5seconds again, the buttons will be unlocked.
-
Page 8: Sleep Mode
The remote controller transmits signals to the system button turn on /off the appliance MODE Select the mode SPEED Select the fan speed SETTING Adjust the room temperature and the timer. SLEEP MODE Set or cancel Sleep mode operation. TIMER Set automatic off and automatic on time. - Page 9 1. Open the back cover, and take off the isolating film on the batteries. 2.Put the batteries inside the slot, with anode and cathode in right directions; 3. Put on the back cover. Notices; 1) The anode and cathode of the batteries must be corresponding to the signs of “+” and “-“...
- Page 10 HOW TO USE To operate the air conditioner, point the remote controller at the signal receptor. The remote controller will operate the air conditioner at distance of up to 5m when pointing at signal receptor of the air conditioner.
- Page 11 The protective device may operate and stop the appliance in the cases listed below. Indoor air temperature is over 43°C Cooling Room temperature is below 15°C Room temperature is below 15°C Dehumidifying The protective device will work in the following cases. ⚫...
- Page 12 . If the appliance will not be used for a long time, be sure to Pull out the primary and the secondary rubber plug of the drain port, to drain the water. Re-install the rubber plug after drain. 2. Keep the appliance running with fan only for a half day during a sunny day to dry the appliance inside and prevent from going moldy.
- Page 13 3. Stop the appliance and pull out the power supply plug, then take out the batteries of remote controller and store appliance properly. 1. Clean the air filter and reinstall it. 2. 5. Remove the air hoses and store them properly, and cover the hole tightly.
- Page 14 Before claiming repair, check the machine as follows: Failures Causes Solutions Machine fails to start up. Power supply failure: 1. Plug in 1. Not plugged 2. Replace the power cord or socket; Contact qualified technical service 2. Plug or socket damaged 3.
- Page 15 - 1 0- 1.Air exhaust duct 2.. Connector of air exhaust duct 3. Window exhaust adapter 4. Remote control 5. Baffle plate ⚫ Beside a window, a door or a French window. ⚫ Keep the required distance from the return air outlet to the wall or other obstacles at least 60cm (19 1/2”) ⚫...
- Page 16 How to connect the connectors to the Air exhaust duct. 1. Extend the air exhaust duct (A) by drawing out the two ends of the duct. 2. Screw the air exhaust duct into the connector of air exhaust duct Screw the connector of window into the plastic connectors. Connect the connector of air exhaust duct to the unit.
- Page 17 The manufacturer provides 1year warranty starting from the date on which the appliance arrives at the destination port. The repair under warranty may only be carried out by an authorized service center. When making a claim under the warranty, the original bill of purchase (with purchase date) must be Submitted.
- Page 18 Model R-893 Cooling Capacity (W) 2600W Rated Voltage / Frequency (V/Hz) 220-240V~/50Hz Net Weight (kg) 20Kg Dimensions Body(mm) 310x310x640mm WXDXH Package (mm) 372x372x850mm Refrigerant R290/120g IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC. At the end of its working life, the product must not be disposed of as urban waste.
Need help?
Do you have a question about the R-893 and is the answer not in the manual?
Questions and answers