VLX 2180SR Quick Manual

2180SR Micro Rider Scrubber Quick Guide
This Guide is intended for quick consultation only and does not replace the Use and Maintenance Operator Manual.
Read the Use and Maintenance Operator Manual completely and understand the machine before operating.
Operator video available online at VLXclean.com. For technical support, call 800-861-7352.
PREPARATION & OPERATION
1. Fill the solution tank.
Measuring cup
if needed
2. Switch the machine on by turning the
ignition key.
3. Press the AUTO or ECO button; in
both modes, all the machine's functions
will be activated. In ECO mode, the
machine consumes less energy and
operates more silently.
©Tennant Company. Specifications subject to change without notice.
2180SR Wall Chart 10/18
4. Select the direction of travel.
5. Adjust the machine's speed using the
+ and - buttons.
6. Press the accelerator pedal.
APC
7. Dry sweep before cleaning.
8. Begin cleaning.
APC
When you have finished cleaning,
proceed as follows:
• Press the AUTO or ECO button to
switch off the machine's functions.
• Turn the ignition key off.
• Recharge the batteries.
APC
DAILY MAINTENANCE
9. Empty the dirty water tank through the
drain hose.
1
1