Installing a Security Lock
✎
Cable Lock
Hardware Reference Guide
Security Lock Provisions
The security locks displayed below can be used to secure the
computer. Before installing a security lock, turn off the computer,
unplug the power cord, and lay the computer on its side.
A port security bracket (not shown) is also available. Go to
www.hp.com
for more information.
For maximum security, install a chassis security clip (part number
372291-001) before installing the cable lock.
1. Turn off the computer properly through the operating system,
then turn off any external devices.
2. Disconnect the power cord from the power outlet and disconnect
any external devices.
3. Remove the computer from the stand and lay the computer on its
side.
4. Remove the computer cover. Refer to
Cover."
www.hp.com
"Removing the Computer
C
C-1