Related Manuals for Smartgen HGM9530
Summary of Contents for Smartgen HGM9530
- Page 1 HGM9530 Genset Parallel (With Genset) Unit USER MANUAL SMARTGEN (ZHENGZHOU) TECHNOLOGY CO.,LTD...
- Page 2 Event log NOTE: (1) Two of the outputs are fixed: start output and fuel output. (2)HGM9530’s analog sensors are composed by 3 fixed sensors (temperature, pressure, level) and 2 configurable sensors. NOTE: The features of HGM9210/HGM9220/HGM9310/HGM9320/HGM9410/ HGM9420/HGM9520/HGM9610/HGM9620 controllers mentioned in this document may change, please check the corresponding user manual for accurate information.
- Page 3 HGM9530 GENSET PARALLEL UNIT USER MANUAL OPERATION 5.1 INDICATOR LIGHT NOTE: Selected light indicators description: Warning indicator and Alarm indicator: Alarm Type Warning Indicator Alarm Indicator Warning Slow flashing Slow flashing Trip Alarm Slow flashing Slow flashing Shutdown Alarm Fast flashing...
- Page 4 WARNING: Default password is 00318, user can change it in case of others change the advanced parameters setting. Please clearly remember the password after changing. If you forget it, please contact SmartGen services and send all information in the controller page of “ABOUT” to us. HGM9530 Genset Parallel Unit 2016-11-03 Version 1.4...
- Page 5 HGM9530 GENSET PARALLEL UNIT USER MANUAL 5.3 LCD DISPLAY 5.3.1 MAIN DISPLAY Main screen show pages; use to scroll the pages and to scroll the screen. Main Screen, including as below, Gen: voltage, frequency, current, active power, reactive power...
-
Page 6: Typical Application
HGM9530 GENSET PARALLEL UNIT USER MANUAL 12 TYPICAL APPLICATION HGM9530 typical application diagram Note: Fuse F1：min. 2A; max. 20A. Fuse F2：max. 32A. Users should select suitable fuse depend on practical application. 3 Phase 3 Wire 2 Phase 3 Wire Single Phase 2 Wire... - Page 7 HGM9530 Multi-genset Parallel Application HGM9530 Single-genset Parallel Application Note: Mains parallel function for HGM9530 controller can be selected via configurable input port. In mains parallel mode, generator will run in parallel with mains and it will only be able to output a fixed amount of power.
- Page 8 HGM9530 GENSET PARALLEL UNIT USER MANUAL HGM9530 Expansion Module Connection Diagram Note: HGM9530 can be connected with multiple expansion modules via ECU CANBUS port and it can expand 4 expansion modules most: 1 DOUT16 module, 1 DIN16 module, 2 AIN24 modules.
-
Page 9: Power Management Mode
HGM9530 GENSET PARALLEL UNIT USER MANUAL 13 POWER MANAGEMENT MODE Power management mode can be selected via configurable input ports. HGM9530 Genset Parallel Unit 2016-11-03 Version 1.4 Page 54 of 65... -
Page 10: Load Shedding
HGM9530 GENSET PARALLEL UNIT USER MANUAL LOAD SHEDDING Non-essential load ---- NEL for short. The controller can control the NEL1, NEL2 and NEL3 to trip separately. The order of the essentiality is: NEL3 > NEL2 > NEL1 Auto trip：... -
Page 11: Installation
Battery Voltage Input NOTE: HGM9530 controller can suit for widely range of battery voltage (8~35) VDC. Negative of battery must be connected with the shell of starter stable. The wire’s diameter must be over 2.5mm which is connected to B+ and B- of controller power.