HP dx5150 RAID Installation and Setup Guide
4. When the 'Onboard Chip SATA' appears, select 'RAID
Controller,' press
setting to CMOS.
Note: To increase the amount of time needed to access the BIOS
RAID utility during post, you can change the default value of
zero seconds. The option to change the 'POST Delay' is in the
F10 BIOS Setup in the 'Standard CMOS Features' menu.
Create RAID Sets
1. During computer startup (POST), press the
display the BIOS RAID Configuration Utility.
2. Select 'Create RAID set' option.
3. Choose RAID 1 Mirrored Set
4
Enter
to accept this selection and save the
www.hp.com
F4
function key to
Installation and Setup Guide