Steps To Set Up Raid 0 In Striped Mode; Enable Raid In The Computer Bios - HP Compaq DX5150 Setup Manual

Steps to Set Up RAID 0 in Striped Mode

CAUTION: If
on the hard drives will be erased.

Enable RAID in the Computer BIOS

1. Select 'Integrated Peripherals' in the Main Menu of the F10
BIOS setup.
2. Select the 'South OnChip PCI Device.'
3. Select 'Onboard Chip SATA.'
Installation and Setup Guide
HP dx5150 RAID Installation and Setup Guide
"Disk Striping (RAID 0)"
www.hp.com
is to be used, all the data
9