- in case parallel guide does not allow desired width of
cut, clamp or nail straight piece of wood to workpiece
as a guide, and use the right side of the foot against
this guide u
MAINTENANCE
•
This tool is not intended for professional use
•
Always keep tool clean (especially ventilation slots )
! remove battery from tool before cleaning
•
Always keep the area around lower guard clean (remove
dust and chips by blowing out with compressed air or
with a brush)
•
Clean saw blade immediately after use (especially from
resin and glue)
ENVIRONMENT
•
• Do not dispose of electric tools, batteries,
accessories and packaging together with household
waste material. The electric tools, accessories and
packaging should be sorted for environmental
friendly recycling
! prior to disposal protect battery terminals with
heavy tape to prevent short-circuit
13