Specify Dhcp Server Settings - TP-Link Archer C59 User Manual

Chapter 12

12. 3. Specify DHCP Server Settings

By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and the
router acts as a DHCP server; it dynamically assigns TCP/IP parameters to client devices
from the IP Address Pool. You can change the settings of the DHCP Server if necessary,
and you can reserve LAN IP addresses for specified client devices.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
¾ To specify the IP address that the router assigns:
1. Make sure that the
2. Enter the starting and ending IP addresses in the
3. Enter other parameters if the ISP offers, the
and is the same as the LAN IP address of the router.
4. Click Save.
¾ To reserve an IP address for a specified client device:
1. Click
Downloaded from ManualsNet.com
Advanced > Network >
Enable DHCP Server
Add in the Address Reservation
search engine
DHCP Server.
checkbox is selected.
IP Address
Default Gateway
section.
Customize Your Network Settings
Pool.
is automatically filled
70