TP-Link Archer C59 User Manual page 101

• Your computer might not recognize any DNS server addresses, please manually
configure DNS server.
1 ) Go to
2 ) Enter 8.8.8.8 as Primary DNS, click Save.
• Power cycle the modem and the TP-LINK router.
1 ) Power off your modem and TP-LINK router, leave them off for 1 minute.
2 ) Power on your modem first, wait about 2 minutes until it gets a solid cable or
3 ) Power back TP-LINK router.
4 ) Wait another 1 or 2 minutes and check the Internet access.
• Reset the router to factory default settings and reconfigure the router.
• Upgrade the firmware of the router.
• Check the TCP/IP settings on the particular device if all other devices can get Internet
from the router.
As the picture below shows, if the IP Address is 0.0.0.0, please try the methods below
and try again:
Downloaded from ManualsNet.com
Advanced > Network
Tips: 8.8.8.8 is a safe and public DNS server operated by Google.
Internet light.
search engine
> DHCP Server.
97