TP-Link Archer C59 User Manual page 102

• Make sure the physical connection between the router and the modem is proper
• Clone the MAC address of your computer.
1 ) Visit http://tplinkwifi.net, and log in with the username and password you set
2 ) Go to
3 ) Choose an option to your need (Enter the MAC address if
Tips:
•
•
• Modify the LAN IP address of the router.
Note:
Most TP-LINK routers use 192.168.0.1/192.168.1.1 as their default LAN IP address, it may conflict with the IP
range of your existent ADSL modem/router. If so, the router is not able to communicate with your modem
and cause you can't access the Internet. To resolve this problem, we need to change the LAN IP address of the
router to avoid such conflict, for example, 192.168.2.1.
Downloaded from ManualsNet.com
for the router.
Advanced > Network
Address is selected), and click Save.
Some ISP will register the MAC address of your computer when you access the Internet for the first time
through their Cable modem, if you add a router into your network to share your Internet connection, the
ISP will not accept it as the MAC address is changed, so we need to clone your computer's MAC address to
the router.
The MAC addresses of a computer in wired connection and wireless connection are different.
search engine
> Internet and focus on the MAC Clone section.
Use Custom MAC
98