Table of Contents
Advertisement
Nothing appears to happen
when turning on the unit
Micro hot air pencil not
getting hot
No/insufficient airflow
Unit is vibrating across
workstation
Noisy unit
Troubleshooting Guide
• Check to ensure that the unit is plugged
in
• Make sure that the plug used is
grounded
• Make sure the main breaker in the
house is not tripped
• Contact the manufacturer
• Ensure the unit is plugged into a
grounded outlet
• Ensure the power switch is turned on
• Replace the heating element
• Contact the manufacturer
• Ensure there are no blockages in the
nozzle or hot air pencil shaft
• Adjust the air flow knob to a higher
setting
• Contact the manufacturer.
• Ensure red screws are removed from
bottom of unit
• Contact the manufacturer.
• Ensure the unit is on a flat, level
surface
• Ensure red screws are removed from
bottom of unit
• Ensure all of the screws and brackets
are secure
• Contact the manufacturer
- 10 -
Advertisement
Table of Contents
