LG L15V26 Training Manual page 36

FIRMWARE UPDATES
UPDATE INSTUCTIONS - NORMAL METHOD
1) Copy the Firmware update to the memory card. This has already been done for you if the card
came from LG Customer Service. The firmware file will have the file extension ".epk". Only copy
the firmware update for your model TV.
2) Turn the TV on and insert the memory card into the TV. If the firmware on the card is newer than
the firmware in the TV, the following will be shown:
Current TV Software version: 3.08 (date: 5/5/2005)
The following new software is found in the memory card.
File: 42LP1DU_V313_rom.epk
- Main Software: 3.13
3) Press ENTER on the remote to begin the firmware update. The TV will restart automatically and
show the progress of the update. Do not remove the memory card or remove power from the
TV until complete.
Reading the file...Done
Main Software: Upgrading...22 Percent
4) The TV will show the following messages when the firmware update is complete:
Reading the file...Done
Main Software: Upgrading...Done
The software upgrade has been successfully completed.
Press ENTER to restart the TV now.
The TV will restart automatically in 14 seconds.
5) Press ENTER. After restarting, the TV is ready to use.
Directview LCD Training
36
Firmware Updates