Kodak RODPJFFPVCW100 User Manual page 9

NOTE: The two (2) large metal rods should be inserted into the screen fabric
vertically. The two (2) longer horizontal metal rods (connected by a small and
medium rods) should be inserted into the screen fabric horizontally.
8. Push the screen pins attached to the frame through the small slots located along
the edges of the screen fabric.
NOTE: When pinning the screen fabric to the frame, make sure to pin the four (4)
corners of the screen to the frame first so that the screen is properly
stretched out and spread along the frame. Then, pin the sides of the screen
fabric to the frame.
9. Insert the center support bar diagonally into the frame from behind the screen
fabric. Then, push the ends of the bar so the support bar is positioned vertically
and securely placed into the frame.
push
7